786454
17
Verklein
Vergroot
Pagina terug
1/255
Pagina verder
English | 17
Symbols and their meaning
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear a dust mask.
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the cutting blade can lead to in-
juries.
Wear protective gloves. Cutting discs
have sharp edges and become very hot
during operation.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is a stationary machine that uses cutting
discs to cut metal materials with and against the grain, in
straight lines and at mitre angles up to 45°, without the use
of water.
Using diamond-tipped cutting discs is not permitted.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off function for on/off switch
(2) On/off switch
(3) Handle
(4) Retracting blade guard
(5) Spindle lock
(6) Cutting disc
(7) Angle guide
(8) Locking spindle
(9) Quick release
(10) Spindle handle
(11) Assembly holes
(12) Hex key (8mm)
(13) Base plate
(14) Clamping jaw
(15) Workpiece support for workpieces with cross sec-
tion of max. 40x40mm
(16) Locking screw for angle guide
(17) Transport safety lock
(18) Tool arm
(19) Transport handle
(20) Protective guard
(21) Spark guard plate
(22) Tool spindle
(23) Clamping flange
(24) Washer
(25) Hexagon screw
Technical Data
Cut-off grinder GCO 14-24 J
Article number 3601M372..
Rated power input W 2400
No-load speed min-1 3800
Soft start
Weight according to EPTA-
Procedure 01:2014 kg 18.0
Protection class / II
Permitted workpiece dimensions (maximum/minimum): Permissible
workpiece dimensions
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Dimensions of suitable cutting discs
Max. cutting disc diameter mm 355
Max. cutting disc thickness mm 3
Hole diameter mm 25.4
Noise Information
Noise emission values determined according to
EN62841-3-10.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 101dB(A); sound power level
112dB(A). Uncertainty K=3dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
Bosch Power Tools 1 609 92A 7ND | (26.04.2022)
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GCO 14-24 J bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GCO 14-24 J in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10.85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info