786454
20
Verklein
Vergroot
Pagina terug
1/255
Pagina verder
20 | English
disc. If the cutting disc breaks, your body is more protec-
ted from possible splinters in this position.
Switching On/Off (see figure I)
To start, first press the lock-off button (1).
Then press the on/off switch (2) and keep it pressed.
Note: For safety reasons, the on/off switch (2) cannot be
locked; it must remain pressed throughout operation.
To switch off, release the on/off switch (2).
Soft start
The electronic soft start limits the torque when the power
tool is switched on and increases the service life of the mo-
tor.
Practical advice
General advice on using cutting discs
uDo not touch the cutting disc after use until it has
cooled. The cutting disc becomes very hot during use.
uMake sure that the spark guard plate (21) is fitted
properly. Flying sparks are created when sanding metals.
Protect the cutting disc against impact, shock and grease.
Do not subject the cutting disc to lateral pressure.
Do not load the power tool so heavily that it comes to a stop.
Excessive feed significantly reduces the performance of the
power tool and the service life of the cutting disc.
Only use cutting discs that are suitable for the material being
machined.
Permissible workpiece dimensions
Maximum workpiece dimensions:
Workpiece shape Mitre angle
45°
Dia. 129 Dia. 128
119 x 119 110 x 110
100 x 196 107 x 115
130 x 130 115 x 115
Minimum workpiece dimensions
(= all workpieces which can still be clamped in place with the
locking spindle (8)): Length 80mm
Maximum cutting depth (0°/0°): 129mm
Cutting metal
Set the required mitre angle as necessary.
Firmly clamp the workpiece as appropriate for its dimen-
sions.
Switch on the power tool.
Slowly guide the tool arm downwards using the handle
(3).
Cut the workpiece, applying uniform feed.
Switch off the power tool and wait until the cutting disc
has come to a complete stop.
Slowly guide the tool arm upwards.
Transport
Always carry the power tool by the transport handle (19).
uOnly use the transport devices to transport the power
tool and never the protective devices.
Maintenance and Service
Maintenance and Cleaning
uPull the plug out of the socket before carrying out any
work on the power tool.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
uClean the air vents on your power tool regularly. The
motor’s fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
uIn extreme conditions, always use a dust extractor if
possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD) upstream. When
machining metals, conductive dust can settle inside the
power tool, which can affect its protective insulation.
uHave maintenance and repair work performed exclus-
ively by a qualified specialist. This will ensure that the
safety of the power tool is maintained.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times.
Accessories
Article number
Cutting discs for all metal materials
Cutting disc 355x25.4mm 2 608 600 208
Cutting disc 355x25.4mm 2 608 600 223
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
1 609 92A 7ND | (26.04.2022) Bosch Power Tools
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GCO 14-24 J bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GCO 14-24 J in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10.85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info