786259
22
Verklein
Vergroot
Pagina terug
1/337
Pagina verder
22 | English
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Operation
Start-up
uEnsure that the cover (13) of the Bluetooth® Low Energy
Module GCY42 is closed during operation. This will pre-
vent dust from getting in.
Setting the Operating Mode (seefigureH)
You can use the combi switch(7) to select the operating
mode of the power tool.
Note: Only change the operating mode when the power tool
is switched off. Otherwise, the power tool may become dam-
aged.
Note: If you switch to a different operating mode while the
on/off switch is locked, the power tool will switch off.
To change the operating mode, turn the combi switch(7)
to the required position until you hear it click into place.
Position for hammer drilling into concrete or
stone
GBH18V-34CF with keyless quick-change
chuck(1): Position for drilling without impact
in wood, metal, ceramic and plastic (clock-
wise)
Anti-clockwise position for loosening the ap-
plication tool from the workpiece
Vario-Lock position for changing the chiselling
position.
Position for chiselling
Switching On/Off
If necessary, release the lock-on button(9) for the on/off
switch.
To switch on the power tool, press the on/off
switch(11).
The lamp lights up when the on/off switch(11) is lightly or
fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch
(11).
Adjusting the Speed/Impact Rate
You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch(11) to varying ex-
tents.
Applying light pressure to the on/off switch(11) results in a
low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.
You can also control the speed on the user interface and/or
via a smartphone app: .
Changing the chiselling position (Vario-Lock)
You can lock the chisel in 16 different positions, so you can
select the optimum working position for each task.
Insert the chisel into the tool holder.
Turn the combi switch(7) to the "drilling" position.
Turn the application tool to the required chisel position.
Turn the combi switch(7) to the "chiselling" position.
With this, the tool holder is locked.
Chiselling with lock function
To chisel for extended periods without pressing the on/off
switch(11), lock the on/off switch in "chiselling" operating
mode.
To lock the power tool, press the on/off switch(11)
down fully whilst simultaneously pressing the lock-on
switch(9).
To switch the lock off, press the lock-on button(9) again.
User interface (seefigureI)
The user interface(19) is used to select the working mode
and to indicate the status of the power tool.
Status indications
Battery charge indicator
(user interface)(23) Meaning/cause Solution
Green (2 to 5 bars) Battery charged
Yellow (1 bar) Battery almost empty Replace or charge battery soon
Red (1 bar) Battery empty Replace or charge battery
Temperature indicator(29) Meaning/cause Solution
Yellow Operating temperature of the battery or the
power tool has significantly increased, per-
formance is reduced
Leave the power tool to cool down or replace
overheated battery
1 609 92A 7SJ | (23.06.2022) Bosch Power Tools
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GBH 18V-34 CF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GBH 18V-34 CF in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7.25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info