786259
24
Verklein
Vergroot
Pagina terug
1/337
Pagina verder
24 | English
Working mode(25) indic-
ator Functions
lights up Favourite working mode: Individual configuration via smartphone app
The following settings are pre-programmed:
"Hammer drilling" operating mode (Electronic Precision Control soft start): Fastest pos-
sible run-up up to maximum power
Rapid Shut-off (KickBack Control) active
"Chiselling" operating mode (Adaptive Speed Control soft start): Deactivated, fastest pos-
sible run-up up to maximum power
Connectivity functions
In conjunction with the Bluetooth® Low Energy Module
GCY42, the following connectivity functions are available
for the power tool:
Registration and personalisation
Status check, output of warning messages
General information and settings
Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy ModuleGCY42.
Practical Advice
uWith the Bluetooth® Low Energy Module GCY 42, the
power tool is equipped with a radio interface. Local
operating restrictions, e.g. in aircraft or hospitals,
must be observed.
uIn areas where the Bluetooth® wireless technology is
not allowed to be used, the Bluetooth® Low Energy
Module GCY42 and the button cell must be removed.
Note: The cover(13) can only be securely closed if the
Bluetooth® Low Energy Module GCY42 and the button cell
are situated in the power tool.
To deactivate the Bluetooth® Low Energy Module
GCY42, rotate the button cell or place means of insula-
tion between the button cell and Bluetooth® Low Energy
Module GCY42.
Close the cover(13) to prevent dirt from getting in.
Setting the drilling depth (see figure J)
You can use the depth stop (17) to set the required drilling
depthX.
Press the button for depth stop adjustment (15) and in-
sert the depth stop into the auxiliary handle (16).
The fluting on the depth stop (17) must face downwards.
Insert the SDS-plus application tool into the SDS-plus tool
holder (3) to the stop. Otherwise, the movability of the
SDS-plus drilling tool can lead to incorrect adjustment of
the drilling depth.
Pull the depth stop far enough out that the distance
between the drill bit tip and the edge of the depth stop
corresponds to the required drilling depth X.
Overload clutch
uIf the application tool jams or snags, the power trans-
mission to the drill spindle will be interrupted. Always
hold the power tool firmly with both hands to with-
stand the forces this may create and adopt a position
with stable footing.
uSwitch the power tool off immediately and remove the
application tool if the power tool becomes blocked.
Switching on when the drilling tool is blocked may
cause high torque reactions.
Rapid shut-off (KickBack Control)
The rapid shut-off function (KickBack
Control) gives the user greater control
over the power tool and offers them bet-
ter protection than power tools that do
not have Kickback Control. If the power
tool suddenly and unforeseeably rotates
around the drilling axis, it will switch off,
the rapid shut-off indicator (24) will light
up red and the worklight (14) will flash.
When rapid shut-off is activated, the
status indicator(27) flashes red.
To switch the tool back on, release the on/off switch
(11) and then press it again.
Electronic Precision Control (EPC)
EPC assists you when drilling and when working with impact
in sensitive materials by ensuring slow start-up of the operat-
ing speed for precise working.
Adaptive Speed Control in "Chiselling" Operating Mode
For better control and precise position-
ing, the power tool starts at a low speed
and then increases to the set speed.
Adapted Speed Control is started up
automatically when the power tool is
switched on.
Vibration damping
The integrated vibration damping function re-
duces the generated vibration.
uDo not continue to use the power tool if the damping
element is damaged.
Maintenance and Service
Maintenance and Cleaning
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
1 609 92A 7SJ | (23.06.2022) Bosch Power Tools
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GBH 18V-34 CF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GBH 18V-34 CF in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7.25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info