544331
26
Verklein
Vergroot
Pagina terug
1/345
Pagina verder
26 | English
1 609 929 X40 | (30.8.10) Bosch Power Tools
Examples for Measuring Results
Note: In the following examples, the audio sig-
nal on the measuring tool is switched on.
Depending on the size and depth of the object
under the sensor range, it is not always possible
to positively determine whether this object is
“live” or voltage-free. In this case, the sym-
bol will appear in indicator n.
“Live” Wire (see figure C)
A “live”, metal object (e.g. a power cable) is
within the sensor range. The allowable drilling
depth is 1.5 cm. The measuring tool emits the
warning signal for “live” conductors as soon as
the power cable is detected by the sensor.
Steel Bar (see figure D)
A magnetic object (e.g. a steel bar) is within the
sensor range. Further objects are also located to
the left and right, outside of the sensor range.
The allowable drilling depth is 8.8 cm. The
measuring tool emits an audio signal.
Copper Pipe (see figure E)
A metal object (e.g. a copper pipe) is within the
sensor range. The allowable drilling depth is
4 cm. The measuring tool emits an audio signal.
Plastic or Wooden Object (see figure F)
A non-metal object is within the sensor range. The
object is plastic or wooden, and close to the
surface. The measuring tool emits an audio signal.
Large Surface (see figure G)
A metal, large surface (e.g. a metal plate) is within
the sensor range. The allowable drilling depth is
2 cm. The measuring tool emits an audio signal.
Many Unclear Signals (see figures HI)
When many objects are shown in the standard
start display, the wall probably consists of many
hollow spaces (hollow blocks). To broadly block
out the hollow spaces, switch to the “Hollow
block” operating mode. When there are still too
many objects being shown, carry out several
height-offset measurements and mark the de-
tected objects on the wall. Offset marks are an
indication for hollow spaces, whereas marks on
a line indicate an object.
Maintenance and Service
Maintenance and Cleaning
f Check the measuring tool each time before
use. In case of visible damage or loose com-
ponents inside the measuring tool, safe func-
tion can no longer be ensured.
Keep the measuring tool clean and dry at all
times to ensure proper and safe working.
Do not immerse the measuring tool in water or
other fluids.
Wipe away debris or contamination with a dry,
soft cloth. Do not use cleaning agents or solvents.
Pay attention that the maintenance
flap 7 is always properly closed. The
maintenance flap may only be
opened by an authorised after-sales
service centre for Bosch power tools.
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised af-
ter-sales service centre for Bosch power tools.
Do not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the measuring tool.
Store and transport the measuring tool only in
the supplied protective pouch.
In case of repairs, send in the measuring tool
packed in its protective pouch 18.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
?
OBJ_BUCH-844-006.book Page 26 Monday, August 30, 2010 10:44 AM
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch D-tect 150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch D-tect 150 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 19,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info