544331
25
Verklein
Vergroot
Pagina terug
1/345
Pagina verder
English | 25
Bosch Power Tools 1 609 929 X40 | (30.8.10)
“Settings” Menu
To access the “Settings” menu, press the setup
button 14.
To exit the menu, press the start button 11. The
current settings are saved. The standard start
display for the measuring process is activated.
Navigating in the Menu
Press the setup button 14 to scroll down.
Press the selection buttons 10 and 12 to select
the values:
Selection button 10 will select the right-hand
or next value.
Selection button 12 will select the left-hand
or previous value.
Language
In the “Language” menu, you can change the
language of the menu navigation. The default
setting is “English”.
Cut-off Time
In the “Cut-off time” menu, you can set certain
time intervals after which the measuring tool
shall automatically shut off when no measure-
ments are taken or settings are carried out. The
default setting is “5 min”.
Light Duration
In the “Light duration” menu, you can set a time
interval within which the display 16 shall be illu-
minated. The default setting is “30 s”.
Brightness
In the “Brightness” menu, you can adjust the
brightness of the display backlight. The default
setting is “Max”.
Tone Signals
In the “Tone signal” menu, you can limit when
the measuring tool shall emit an audio signal. The
precondition for this is that the signal has not
been switched off via the audio signal button 13.
The default setting is “Wallobjects”: An audio
signal sounds after each button press, and
whenever a wall object is under the sensor
range. Additionally, a short-beat warning sig-
nal is given for “live” wires.
With the setting “Live wire”, an audio signal
sounds after each button press, as does the
warning signal for “live” wires (short-beat
signal), when the measuring tool indicates a
power line.
With the setting “Keyclick”, a tone signal
only sounds after a button press.
Default Mode
In the “Defaultmode” menu, you can set the de-
fault operating mode that is to be pre-set after
switching on the measuring tool. The default
setting is “Universal mode”.
“Extended Settings” Menu
To access the “Extended settings” menu, press
the setup button 14 and the On/Off button 15 at
the same time when the measuring tool is
switched off.
To exit the menu, press the start button 11. The
standard start display for the measuring proc-
ess is activated and the settings are saved.
Navigating in the Menu
Press the setup button 14 to scroll down.
Press the selection buttons 10 and 12 to select
the values:
Selection button 10 will select the right-hand
or next value.
Selection button 12 will select the left-hand
or previous value.
Device Information
In the “Device Infos” menu, you can access in-
formation on the measuring tool, e.g. the “Oper-
ation Time”.
In the “Restore Settings” menu, you can restore
the factory settings.
OBJ_BUCH-844-006.book Page 25 Monday, August 30, 2010 10:44 AM
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch D-tect 150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch D-tect 150 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 19,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info