97284
19
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
English | 193 609 929 A78 8.8.06
Inserting
Press in the pin on the drive square of the bit holder 11,
e. g., with the aid of a small screwdriver, and slide the
tool bit 12 over the drive square. Take care that the pin
engages in the recess of the tool bit.
Removing
Press in the pin in the recess of the tool bit 12 and pull
the tool bit out of the tool holder 11.
Operating Instructions
Putting into Operation
The air tool operates optimally with a pressure of
6.3 bar (91 psi) measured at the air inlet with the tool
running.
f Pay attention to the direction of rotation that
is set before switching on the pneumatic tool.
For example, when a screw is to be loosened and
the direction of rotation is set so that the screw is
tightened, this can lead to a strong torque reaction
of the pneumatic tool.
Reversing the Rotational Direction
Right rotation: To screw in screws, turn the rotational
direction switch 9 in the given direction of the arrow to
the leftuntil it stops.
Left rotation: To loosen or to unscrew screws, turn
the rotational direction switch 9 in the given direction of
the arrow to the right until it stops.
f Operate the rotational direction switch 9 only
when the pneumatic tool is at a standstill.
Switching On and Off
Note: If the tool does not start after, for example, not
being used for a long period of time, disconnect the air
supply and turn the motor repeatedly by rotating the
tool bit holder 11. This eliminates adhesive forces.
The screwdriver have a shut-off clutch
that depends on the torque and can be set
in the given range. It responds when the
torque that is set is reached.
Switching on: Press the on/off switch 5 to the
stop.The screwdriver switches off automatically when
the adjusted torque setting is reached.
Switching off: Release the on/off switch 5.
f When the on/off switch 5 is released prema-
turely, the preset torque is not reached.
Working Instructions
f Disconnect the air hose from the air source
before making any adjustments, changing
accessories, or storing the pneumatic tool.
Such preventive safety measures reduce the risk of
starting the pneumatic tool accidentally.
f Place the tool bit onto the nut/screw only
when the screwdriver is switched off. Rotating
tool bits can slide off the nut/screw.
f In the event of an interruption of the air sup-
ply or reduced operating pressure, switch off
the pneumatic tool. Check the operating pres-
sure and restart the tool when the operating
pressure is again optimal.
Excess loads that cause the pneumatic tool to stall or
reduce speed will not damage the motor.
12
11
9
5
OBJ_BUCH-220-001.book Page 19 Tuesday, August 8, 2006 9:41 AM
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-0-607-452-603

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch 0 607 452 603 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch 0 607 452 603 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 13,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info