97284
21
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
English | 213 609 929 A78 8.8.06
Maintenance and Service
Maintenance and Cleaning
f Disconnect the air hose from the air source
before making any adjustments, changing
accessories, or storing the pneumatic tool.
Such preventive safety measures reduce the risk of
starting the pneumatic tool accidentally.
Should the pneumatic tool fail in spite of careful manu-
facturing and testing procedures, have the repairs per-
formed by an authorized customer service location for
Bosch power tools.
For inquiries and spare parts ordering, please include
the 10-place article number on the nameplate of the
pneumatic tool.
Clean the screen of the air inlet reg-
ularly. For this purpose, unscrew
the hose nipple 8 and remove dust
and dirt particles from the screen.
Then firmly remount the hose nip-
ple.
To prevent damage to the internal
valve components of the tool, you
should use an open-end spanner (size 22 mm) to apply
a counterforce at the protruding connector of the air
inlet 7 when screwing/unscrewing the hose nipple 8.
Water and dirt particles in the compressed
air cause rust formation and lead to clog-
ging of vanes, valves, etc. To prevent this,
a few drops of motor oil should be placed
in the air inlet 7. Reconnect the pneumatic
tool to the air supply (see “Connection to the Air Sup-
ply”, page 18) and let the tool run for 510 s while
catching the oil that runs out with a rag. If the pneu-
matic tool is not used for a longer time, this pro-
cedure should always be performed.
All Bosch pneumatic tools that do not belong to the
CLEAN-series (a special kind of air motor that functions
with oil-free compressed air), require a small amount of
lubricating oil be mixed into the flow of compressed air.
The compressed air oiler required for this is located at
the compressed air maintenance unit connected to the
pneumatic tool (you may obtain further details on this
from a compressor manufacturer).
Clean the gearbox after the first 150 running hours
using a mild solvent. Follow the solvent manufacturers
directions for use and disposal. Lubricate the gearbox
using Bosch gearbox lube. Repeat the lubrication pro-
cedure every 300 hours after the initial gearbox service.
Oil the moving parts of the shut-off clutch after 100000
screwing operations with a few drops of SAE 10/SAE 20
motor oil. Lubricate the sliding and rolling parts with Moly-
cote grease. At this time, inspect the clutch for wear in
order to ensure that the reproducibility and precision
have not been affected. Afterwards, the torque of the
clutch must be read justed.
Lubricants:
Special gearbox grease (225 ml)
Article number 3 605 430 009
Molycote grease
SAE 10/SAE 20 motor oil
The motor vanes should be routinely inspected by
trained personnel and, if necessary, replaced.
f Have maintenance and repair work performed
only by qualified specialists. In this manner, it
can be ensured that the safety of the pneumatic tool
is maintained.
Any Bosch customer service center can perform this
work quickly an reliably.
Observe all applicable environmental regula-
tions when disposing of old grease or solvents.
Accessories
Information about the complete quality accessory pro-
gram can be found on the Internet at
www.bosch-pt.com and
www.boschproductiontools.com or at your dealer.
Service and Customer Assistance
Robert Bosch GmbH is responsible for the delivery of
the product in accordance with the sales contract
within the framework of the legal/country-specific regu-
lations. For claims with respect to the tool, please con-
tact the following location:
Fax. . . . . . . . . . . . . . . . . . . . . . . .+49 (711) 7 58 24 36
www.boschproductiontools.com
Disposal
Pneumatic tool, accessories, and packaging should be
sorted for environment-friendly recycling.
f Dispose of the motor vanes properly! Motor
vanes contain Teflon. Do not heat them above
400 °C, because this could result in the formation
of dangerous vapors.
If your air tool can no longer be used, deliver it to a recy-
cling center or return it to a dealer for example, an
authorized Bosch service center.
Subject to change without notice.
7
8
OBJ_BUCH-220-001.book Page 21 Tuesday, August 8, 2006 9:41 AM
21

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-0-607-452-603

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch 0 607 452 603 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch 0 607 452 603 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 13,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info