97284
18
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
18 | English 3 609 929 A78 8.8.06
Exhaust Line
Slip the exhaust hose (combined) 13, which carries the
exhaust air away from your workplace, over the air inlet
hose 14. Then connect the pneumatic tool to the air
supply (see “Connection to the Air Supply”, page 18)
and pull the exhaust hose (combined) 13 over the
mounted air inlet hose to the end of the tool.
Connection to the Air Supply
The pneumatic tool is designed for an operating pres-
sure of 6.3 bar (91 psi). For maximum performance, the
inner diameter of the hose is 10 mm with connection
threads of G 1/4". To maintain full performance, use
only hoses with a maximum length of 4 m.
The supplied air must be free of foreign material and
moisture to protect the pneumatic tool from damage,
contamination, and rust.
Note: The use of a compressed air maintenance unit is
necessary. This ensures optimum functioning of com-
pressed air tools.
Observe the operating instructions of the maintenance
unit.
All fittings, connecting lines, and hoses must be dimen-
sioned for the required air pressure and volume.
Avoid restrictions in the air supply resulting from, e.g.,
pinching, kinking, or stretching!
In case of doubt, measure the pressure with a pressure
gauge at the air inlet with the pneumatic tool switched
on.
Connection of the Air Supply to the
Pneumatic Tool
Screw the hose nipple 8 into the connector at the air
inlet 7.
To prevent damage to the internal valve components of
the tool, you should use an open-end spanner (size
22 mm) to apply a counterforce at the protruding con-
nector of the air inlet 7 when screwing/unscrewing the
hose nipple 8.
Loosen the hose clamps 15 of the air inlet hose 14 and
attach the air inlet hose over the hose nipple 8 by firmly
tightening the hose clamp.
Note: Always connect the air inlet hose first to the
pneumatic tool, then to the maintenance unit.
Slip the air inlet hose 14 over the coupling nipple 16
and attach the air inlet hose by firmly tightening the
hose clamp 15.
Screw a quick hose connector 17 in the air outlet of the
maintenance unit 18. Quick hose connectors make
possible a quick connection and, when uncoupled,
thea shut off the air supply automatically.
Take care that you do not start the pneumatic tool acci-
dentally when you insert the coupling nipple 16 into the
coupler 17.
Changing the Tool
f When you install the tool bit, take care that
the tool bit is seated securely on the tool bit
holder. If the tool bit is not joined securely to the
tool bit holder, it may become loose and it may no
longer be controllable.
The angle nutrunners with shut-off mechanism are
delivered with an angled drive head (3/8" square drive),
but without tool bits.
14
13
18
7
8
15
14
16
17
OBJ_BUCH-220-001.book Page 18 Tuesday, August 8, 2006 9:41 AM
18

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bosch-0-607-452-603

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch 0 607 452 603 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch 0 607 452 603 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 13,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info