680440
29
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
Check whether the gate can be opened and closed
correctly.
Immobilize any mechanical locks not needed for power
operation of the sliding gate. This includes in particular
any locking mechanisms connected with the gate lock.
Mechanically secure the gate to prevent it from running
out of its guides.
Change to the illustrated section for the fitting and
initial operation. Observe the respective text section
when you are prompted to by the symbol for the text
reference.
3.2 Fitting the sliding gate operator
WARNING
Danger of injury due to unwanted gate travel
Incorrect assembly or handling of the operator may trigger
unwanted gate travel that may result in persons or objects
being trapped.
Follow all the instructions provided in this manual.
3.2.1 Foundation
ATTENTION
Malfunctions in the connection cables
Malfunctions may occur if connection cables and supply
lines are ducted together.
Duct the operator's connection cables (24VDC) in an
installation system that is separate from supply lines
(230 / 240VAC).
1. A foundation must be laid (see Figure1a / 1b). The
*
mark represents the frost-free depth (inGermany=
80cm).
A larger foundation must be laid if using a closing edge
safety device (see Figure1c / 1d).
2. Concrete ≥B25 / C25 (compacted) must be used with the
operator type with base plate.
3. A base foundation may be required for gates with inside
rollers.
4. The 230 / 240VAC mains lead must be routed through a
tube in the foundation. The lead to connect 24V
accessories must be installed in a tube that is separated
from the mains lead (see Figure1.1).
NOTE:
The foundation must have set and dried sufficiently before
the following work is carried out.
3.2.2 Establishing the fitting dimensions
1. Mark the drill position of the four drill holes on the surface
of the foundation.
Depending on the operator, use:
The drill stencil at the back of these instructions for
Ø12mm holes with stock screws (see Figure2a).
The base plate for Ø10mm holes with heavy-duty
anchors (see Figure2b).
2. Select the toothed track to be used from the table below
and find the minimum and maximum fitting dimensions
(dimensionA).
Toothed track Dimension A (mm)
Min. Max.
2901624 126 138
438631 125 129
438632 129 133
3.2.3 Fixing
See Figures2a.1 / 2b.1
WARNING
Unsuitable fixing material
Use of unsuitable fixing material may mean that the
operator is insecurely attached and could come loose.
Only use the provided fixing material in concrete
≥B25 / C25 (see Figures1.1 / 2.1).
ATTENTION
Damage caused by dirt
Drilling dust and chippings can lead to malfunctions.
Cover the operator during drilling work.
After drilling, check the depth of the hole.
Hole Depth
Ø12mm for stock screws 80 mm
Ø10mm for heavy-duty anchors 105 mm
Use the socket wrench included in the scope of delivery
to install the stock screws.
3.2.4 Fitting the operator housing
See Figures3 – 3.5
ATTENTION!
Damage due to moisture
Protect the control from moisture when you open the
operator housing
Open the operator housing, release the operator and
remove the circuit board bracket.
The motor and toothed wheel are lowered in the housing
when the operator is released.
If necessary, cut the tube seals to fit the tubes.
When the housing is placed on the stock screws or base
plate, pull the mains lead and, if necessary, the 24V
connecting lead from below through the tube seals and
into the housing without any distortion.
When tightening, pay attention that it is horizontal, stable
and securely fastened.
3.3 Fitting the toothed track
Prior to fitting:
Check that required hole depths are available.
To fit the toothed tracks, use the connectors(bolts and
nuts, etc.) from the fitting accessories (see FigureC1 or
FigureC4). These must be ordered separately.
C300 - C800 / Rev. 1.1 RE / 07.2014 29
ENGLISH
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berner C500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berner C500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 12,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info