680440
27
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
Check for smooth running
If necessary, see the separate fitting
instructions for the emergency battery
Standard sliding gate operator
Reinforced sliding gate operator
Power failure
Restore power
Audible engagement
DIL switch factory setting
1.5 Abbreviations used
Colour code for cables, single conductors and
components
The abbreviations of the colours for identifying the cables,
conductors and components comply with the international
colour code according to IEC757:
BN Brown
GN Green
WH White
YE Yellow
1.6 Information on the illustrated section
The illustrated section shows the operator fitting of an
operator without a base plate to the inside right of the closed
sliding gate. Where fitting or programming differs for an
operator with base plate or for a sliding gate with the operator
attached to the inside left of the closed sliding gate, this is
shown in addition.
All dimensions in the illustrated section are in [mm].
2 Safety Instructions
ATTENTION:
IMPORTANT SAFETY INSTRUCTIONS.
FOR THE SAFETY OF PERSONS, IT IS IMPORTANT TO
COMPLY WITH THE FOLLOWING INSTRUCTIONS. THESE
INSTRUCTIONS MUST BE KEPT.
2.1 Intended use
Depending on the type of operator, the operator can be used
in private / non-commercial areas or in commercial areas.
The sliding door operator is exclusively intended for the
operation of smooth-running sliding doors. The maximum
permissible door size and maximum weight must not be
exceeded. The door must be easy to open and close
manually.
Note the manufacturer's specifications regarding the gate and
operator combination. Potential hazards as outlined in
DINEN13241-1 are avoided by construction and fitting
according to our guidelines. Gate systems that are located in
a public area and only have one protective device, such as a
force limit, may only be operated under supervision.
2.2 Inappropriate use
Continuous operation and use on gates with a gradient or
slope is not permitted.
2.3 Fitter qualification
Only correct fitting and maintenance in compliance with the
instructions by a competent / specialist company or a
competent / qualified person ensures safe and flawless
operation of the system. According to EN12635, a specialist
is a person with suitable training, specialist knowledge and
practical experience sufficient to correctly and safely fit, test,
and maintain a gate system.
2.4 Safety instructions for fitting, maintenance,
repairs and disassembly of the gate system
WARNING
Danger of injury due to a malfunction in the gate system
See warning in section3.1
WARNING
Danger of injury due to unexpected gate travel
See warning in section9
Fitting, maintenance, repairs, and disassembly of the gate
system and sliding gate operator must be performed by a
specialist.
In the event of a gate system or gate operator failure
(sluggish operation or other malfunctions), a specialist
must be commissioned immediately for the
inspection / repair work.
C300 - C800 / Rev. 1.1 RE / 07.2014 27
ENGLISH
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berner C500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berner C500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 12,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info