660501
20
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
20 X AIR User Manual
6. X AIR for Android
The X AIR applications for iOS, Android and Mac/Win/Linux allow all of the
physical controls and features normally found on analog mixers to be adjusted
digitally, and also allow eects and routing to be fully adjusted, all from a remote
location away from the input box. This results in a very compact, yet full-featured
mixing solution that can be operated while moving about the venue or studio.
This chapter will discuss the software’s functionality on an Android device.
6.1 Main View
The Main View screen provides access to all 16 channel faders, Aux in, and FX and
bus levels, as well as navigation to preamp controls, meters, FX slots and more.
1. The Channel Strip gives quick reference to the status of various preamp
settings, and allows access to Gate, Dynamics, EQ, Pan and Input controls.
2. Touch a channel’s Solo button to send the channel to the solo bus. The corner
of the button will light yellow to indicate that a channel has been soloed.
3. Each channel has a dedicated meter to monitor the input level. If the meter
reaches the red clip lights, lower the gain control on the Input screen.
4. The Channel Fader adjusts a channels level, or adjusts the aux/FX/bus send
level, depending on which layer is selected on the right-hand side.
5. Touch a channels Mute button to mute the channel. The button will light red
when muted.
6. Access the Meters, Eect Rack, Snapshots, Show/Scene, Routing and Setup
pages by touching these buttons.
7. Engaging the Fine button causes the faders to be adjusted in smaller
increments, allowing more precise control.
8. Select a channel bank 1-8 or 9-16 with these buttons.
9. Access the Mute Group edit screen by pressing the Mutes button:
Engage the Mute Lock button to prevent accidental muting of individual channels.
Mute All and Unmute All are quick ways to fully mute or unmute all sources. Tap one
of the 4 Mute Group buttons to mute the channels assigned to that group, and hold
one of the buttons to edit which channels are assigned to the group.
10. Access the Aux and FX return faders with this button.
11. Activate the Sends on Faders function with this button. When active,
thefaders control the bus send levels for the currently active bus
(seecallout13). Moving between the channel and Aux/FX layers allows the
sends for those layers to be adjusted as well.
12. Access the bus master faders with this button. Note that these will not be
visible when the Sends on Faders function is active.
13. When using the Sends on Faders function, the bus to which the channel
signals are sent is selected with the button directly below the Sends on
Faders button. Pressing the Bus Master button will allow the send level for
the selected bus to be adjusted.
14. Access the FX Send and Main LR faders with this button.
6.2 Input
The Input section allows adjustment of the most common preamp parameters
such as gain, phase and phantom power. This is accessed from the Main View
screen by pressing just above the Solo button in the channel strip area. By
default, each channel will have a generic name such as “Ch 01” or “Bus 1”, but this
can be customized in this section.
1. Touch this top button to access the Scribble Strip page where a custom name
and color can be selected.
2. Adjust the Pan by touching this button.
3. The on/o status and basic parameters for several preamp features can be
adjusted on this page. To edit in detail, press Cong, Gate, EQ, etc.
4. Many preamp functions have factory settings that can be accessed from the
folder icon.
5. Current settings can be saved for later recall.
6. Press this button to copy the current settings.
7. Press this button to paste the recently-copied settings from one channel
toanother.
8. Skip to the previous or next channel with the arrow buttons.
(7)
(9)
(11)
(10)
(13)
(12)
(14)
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(1)
(2)
(4) (5) (6) (7)(3) (8)
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer XAir - XR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer XAir - XR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer XAir - XR16

Behringer XAir - XR16 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info