660501
21
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
21 X AIR User Manual
6.3 Cong
1. Invert the phase with this button.
2. Press the Link button to link the adjacent channel for stereo operation.
3. Engage the 48 V phantom power by pressing and holding this button.
4. Adjust the analog input Gain with this control.
5. Engage an eect Insert and select the FX bus that will be inserted.
6. The source for the channel’s physical input and USB input can be selected
with these pull-down menus.
7. Select whether the analog input or USB input appears at this channel.
8. The S/E button appears at the top of many edit pages, and oers the option
to view a simple or expanded set of controls, especially for the Gate and
Dynamics pages.
9. Engage the Low Cut with this button to remove unwanted low frequencies.
10. Adjust the digital Trim for the USB input with this control.
6.4 Gate
The Gate tab allows a noise gate to be engaged and adjusted to remove
unwanted noise. Using the S/E button, a simple or expanded set of parameters
can be selected to accommodate various levels of mixing expertise. Presets can
also be selected from the folder icon to automatically load settings that suit
yourapplication.
1. Engage the gate with the ON button.
2. The function menu allows various types of gates to be selected. The
EXP 2, 3 and 4 settings create an extra-steep taper for signals that fall
below the threshold. The Gate setting enables a more aggressive drop in
volume for signals below the threshold. The Ducker setting attenuates the
signal by a predetermined amount whenever the signal rises beyond the
selectedthreshold.
3. Adjust the Threshold that the audio must reach in order to bypass the gate or
engage the Ducker.
4. The Range parameter adjusts the amount of attenuation for the
GateandDucker.
5. Adjust the Attack knob to set how quickly the gate takes eect when the
input signal drops below the threshold.
6. Adjust the Hold knob to set how long the input signal must surpass the
threshold before bypassing the gate.
7. Adjust the Release knob to set how quickly the gate releases after the audio
rises above the threshold.
8. Engage the key lter with the Key On button.
9. Select a low cut, high cut or mid peak frequency and bandwidth/slope for
the key lter.
10. Select the frequency for the key lter.
6.5 EQ
1. Engage the EQ with the ON button.
2. Engage the Lowcut button to remove unwanted low frequencies.
3. Select the type of EQ for the selected band. This menu will only be available
when one of the 4 bands are active, not including the lowcut.
4. Drag the band button left and right to determine the specic frequency,
andmove it up and down to determine the amount of boost or cut.
Useapinch or spread gesture (zoom in/out) to alter the bandwidth/Q.
5. Select the source for the RTA to display.
6. To automatically send the channel that you are currently editing to the RTA,
press the Follow button.
7. Press the Post button to display the post-EQ results in the RTA.
(2)
(5)
(3)
(1)
(6) (7)
(8)
(9)
(4)
(10)
(1)
(2)
(3)
(4)
(5) (6) (7)
(8)
(9)
(10)
(1)
(2)
(3)
(5)
(6)
(7)
(4)
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer XAir - XR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer XAir - XR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer XAir - XR16

Behringer XAir - XR16 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info