660501
18
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
18 X AIR User Manual
5. Adjust the Ratio to determine how aggressively the dynamics are aected.
6. The Wet/Dry ratio determines how much of the signal is left unaected by
the processor.
7. Use the Gain fader to compensate for changes in level caused by
theprocessor.
8. Engage the Key Filter with the on/o button.
9. Select between an aggressive Linear or smooth Logarithmic operation,
andbetween Peak or RMS input response. RMS is most common in
compressors, and responds to the average level of incoming audio,
whereasthe Peak setting responds to brief spikes in loudness that would
beallowed through when set to RMS.
10. Access the Key Filter parameters by pressing this button.
11. Adjust the Attack knob to set how quickly the compressor takes eect when
the input signal rises above the threshold.
12. Adjust the Hold knob to set how long the compressor takes to enter the
release cycle once the audio drops below the threshold.
13. Adjust the Release knob to set how quickly the compressor releases after the
audio drops below the threshold.
14. Select a high-pass, low-pass or mid peak frequency and slope for the key
lter. The specic frequency can be selected by dragging the line across the
frequency chart.
15. Select a source for the key lter.
5.6 Channel EQ
1. Select the type of EQ for each of the 4 bands. Typically cut or shelf EQs are
used for the highs and lows, whereas PEQ (parametric) and VEQ (vintage)
areused for the mid range adjustments.
2. Use the Gain knob to adjust the desired boost or cut to the
selectedfrequency.
3. Adjust the Width (Q) to determine how wide or narrow the frequency
adjustment will be.
4. Use the Freq(uency) knob to select the center frequency for PEQ and VEQ
types, and the starting frequency for cut or shelf EQs.
5. Engage the EQ with the on/o button.
6. Press this button to open the preset list where your settings can be saved
can recalled.
7. Press one of the band buttons to select the band. Drag the button left/right
to set the frequency, and up/down to set the boost or cut. The desired band
must be selected before adjusting the width parameter.
8. Engage the RTA (real time analyzer) with this button. The RTA is pre-EQ by
default, but can be adjusted on the Setup - Audio/MIDI page.
9. Press this button to reset the currently-selected band.
5.7 Insert
Press the folder icon to engage the insert eect. Scroll through the list of eects
blocks to select the desired routing.
5.8 Presets
The Presets tab allows channel presets to be recalled, edited and saved.
Pressthepage icon on the right to save a new preset. Press the pencil icon to
edit or delete a preset, and press on one of the saved presets to save changes
orloadthatpreset.
5.9 Output
The panorama can be adjusted to position the channel in the stereo eld.
5.10 Meters
The Meters page is accessed via the icon at the top of the main screen. This page
allows easy monitoring of all analog and digital levels, including USB channels,
Gate and Dynamics activity, P-16 channels and the Main and Solo buses.
5.11 Shows
The Shows page allows performances to be saved for various venues,
artists,setsand arrangements for later recall. Within those shows,
individualsnapshots can be saved, edited and recalled. Press the page icon
tosave a new show or snapshot. Press the pencil icon to edit or delete a saved
showor snapshot. Pressing on a show or snapshot will allow any changes to
besaved, orfor a new snapshot to be loaded.
(1)
(2)
(3)
(6)
(5)
(7) (4) (8) (9)
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer XAir - XR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer XAir - XR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer XAir - XR16

Behringer XAir - XR16 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info