660501
16
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
16 X AIR User Manual
5. X AIR for iPad
The X AIR applications for iOS, Android and Mac/Win/Linux allow all of the
physical controls and features normally found on analog mixers to be adjusted
digitally, and also allow eects and routing to be fully adjusted, all from a remote
location away from the input box. This results in a very compact, yet full-featured
mixing solution that can be operated while moving about the venue or studio.
This chapter will discuss the software's functionality on an iPad.
5.1 Main Screen
The main screen provides access to all 16 channel faders, Aux in, and FX send
levels, as well as navigation to preamp controls, meters, FX slots and more.
Thechannel strips can be swiped side to side to reveal all 21 faders, and the
selected bus fader is always visible.
1. The Channel Strip control section gives a quick reference to the status of
phantom power, aux send levels, pan, etc., but no adjustments are made
directly on this screen. Touch anywhere inside a channels top strip section to
edit parameters.
2. Touch a channel’s Solo button to send the channel to the solo bus.
Thebutton will light yellow to indicate that a channel has been soloed.
3. Each channel has a dedicated meter to monitor the input level. If the meter
reaches the red clip lights, lower the gain control on the Input screen (5.2).
4. The Channel Fader adjusts a channels level, or adjusts the aux/FX send level,
depending on which layer is selected on the right-hand side (see callout 11).
5. Touch a channels Mute button to mute the channel. The button will light red
when muted.
6. The Meters, Shows, Eects, Routing and Setup buttons allow direct access to
these menus.
7. The Advanced button only applies to the Gate and Dynamics sections
(5.4and 5.5).
8. The Solo Clear button releases all soloed channels.
9. The Solo Meter shows the level of the solo bus.
10. The Channel Width button toggles between normal and condensed channel
strip views. When active, the channel strips provide more detail and
additional room to touch the desired fader or button, while the condensed
view allows all 16 inputs to be viewed simultaneously. In either view,
thestrips must be swiped to the left to access the FX send levels.
11. The Fader Bank buttons alter the function of the channel faders. Whenset
to Main, the faders adjust the channel volume levels sent to the main
bus, andthe overall main output. When one of the Aux or Eect buttons
are selected, the faders adjust each channel’s send level to that bus for
monitoring or eects routing. The level for the Aux or Eect bus that is
currently selected can be adjusted where the main fader normally appears.
5.2 Input
The Input section allows adjustment of the most common preamp parameters
such as gain and phantom power. This is accessed by pressing the top of the
Channel Strip of the channel you wish to modify. If another menu such as Sends
or Gate come up instead, the menus can be swiped side-to-side without
returning to the Main Screen.
1. The Link button allows adjacent channels to be linked as a stereo pair.
Moving one of the linked channels‘ fader will also adjust the other channel.
2. The Phase button inverts the phase.
3. Use the Mic/USB switch to determine whether the channel is fed by
the microphone input or by a signal from a DAW via the multi-channel
USBconnection.
4. The Mic Gain knob adjusts the input gain for the currently selected channels
mic preamp.
5. The USB Trim knob adjusts the digital trim for the signal coming from the
connected computer. The Mic/USB switch must be set to USB.
6. The HPF Freq knob adjusts the frequency of the lter, allowing unwanted
low frequencies to be removed.
7. Engage the HPF (high-pass lter) with this switch.
8. Press this button to engage the phantom power.
5.3 Sends
The Sends tab allows the currently selected channel’s signal to be routed to the
6 Aux outputs and to the 4 Eects processors. Aux and Eects routing can also
adjusted using the fader banks on the right-hand side of the screen.
(7)
(8)
(9)
(10)
(11)
(1)
(2)
(3)
(4)
(5)
(6)
(1)
(2)
(6)
(3)
(8)
(4) (5)
(7)
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer XAir - XR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer XAir - XR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer XAir - XR16

Behringer XAir - XR16 Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info