11
1.3 - Always ensure that the flame does not overflow from under the pans; this will save
energy and will avoid a dangerous concentration of heat.
1.4 - Do not use the appliance in any incorrect way: this hood has been designed only to
reduce the smells of cooking in the kitchen.
2 - USE
Control panel (fig. 8)
The hood is equipped with the following controls:
BUTTON L = Light ON/OFF
BUTTON V1 = Engine ON/OFF in first speed, suitable for a continuous change of air, noiseless,
to be used with little cooking steam.
BUTTON V2 = Second speed, suitable in most conditions of use for its excellent ratio between
quantity of treated air and noise level.
BUTTON V3 = Third speed, suitable to cope with major cooking steam emissions even for long
periods of time.
3 - MAINTENANCE
Regular maintenance and cleaning will ensure good performance and reliability, while extending the
working life of the hood. Special attention should be paid to the grease filters and to the charcoal
filters when the hood is used in the recirculation mode.
3.1 - Metal grease filters.
1 - Cleaning:
The filter must be washed with normal household detergent at least once every 2 months.
Thanks to its compact shape and size it can also be washed in the dishwasher.
2 - Dismantling the filters:
Remove one filter at a time, pressing the handle towards the back of the hood (fig. 9). When
replacing, ensure that the handle remains in a visible position. WARNING - The maintenance
periods indicated should always be complied with, to prevent any risk of fire that might
result from filters saturated with grease.
3.2 - Activated charcoal filter.
1 - Operation:
The activated charcoal filters will capture bad smells until they reach saturation. They cannot
be washed or recycled, and must be replaced at least once every 4 months, or more frequently if
subjected to particularly intense use.
2 - Replacing:
Remove the metal grease filters or the ducting grille, remove the activated charcoal filters
situated at the ends of the fans, turning them in the direction shown by the arrows A. Fit the
new filters, turning them in the direction shown by the arrows B (fig. 10).
3.3 - Light
1 - It consists of 3 20 W-halogen spotlights.
2 - Replacement (fig. 11)
Remove the two screws that lock the metal ring, take the spotlight out of its holder by pulling
