471407
39
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
37-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
5
Select one from “P.1” through “P.6” by rotating the
[Rotary encoder], and press the [Rotary encoder].
The data is stored in the selected preset number.
The function is operable when Defeat is set to OFF.
The stored contents are not deleted even when resetting the unit or
disconnecting the battery.
Recalling a Stored Setting (Preset Call)
The preset memory stores various setting/adjustment information. Thus,
it takes some time to call data from the preset memory.
1
Press and hold [VIEW] for at least 2 seconds.
2
Select a preset from “P.1” through “P.6” by rotating
the [Rotary encoder], and press the [Rotary
encoder].
The values of the selected preset number are retrieved.
You can call the Preset even by the following procedure:
1 Press [FUNC.].
2 Rotate the [Rotary encoder] to select “Preset, ” and then
press the [Rotary encoder].
3 Rotate the [Rotary encoder] to select “Call,” and then
press the [Rotary encoder].
4 Select a preset from “P.1” through “P.6” by rotating the
[Rotary encoder], and press the [Rotary encoder].
The values of the selected preset number are retrieved.
The function is operable when Defeat is set to OFF.
If the speaker system in the preset and the current speaker system do
not match, the preset cannot be retrieved.
If the AUX input system in the preset and the current AUX input
system do not match, the items concerning the AUX input system are
unavailable for retrieval.
Setting the Speaker System (System
Select)
First, set the system and the speakers. Unless you set the system, you
cannot set any features. Be sure to set the system first. If the selected
system and the connections of the speakers do not match, the speakers
may be damaged. Make sure to check the connections of the speakers
before selecting the system.
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Output
Setup,” and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “System
Select,” and then press the [Rotary encoder].
The Output System selection screen is displayed.
4
Rotate the [Rotary encoder] to select a system, and
then press the [Rotary encoder].
F-2way+R+SW: 4.2ch system
(Front2Way+Rear+Subwoofer)
F-3way+SW: 2.2ch system (Front3Way+Subwoofer)
F-3way+R: 4.0ch system (Front3Way+Rear)
F-2way+R+C+SW: 5.1ch system
(Front2Way+Rear+Center+Subwoofer)
Refer to Table 1 (Output System) in “System Configuration”
(page 60).
5
Select “OK” by rotating the [Rotary encoder] when a
confirmation message appears, and press the
[Rotary encoder].
The Speaker Setup screen is displayed.
When “OK” is selected, the audio output is stopped until the ignition
key is turned on/off.
6
Turn off any unconnected speakers. Rotate the
[Rotary encoder] to select “ON” or “OFF,” etc., and
then press the [Rotary encoder].
Repeat the steps until all the speakers are set.
FRONT HIGH*
1
: OFF/Tweeter/Full
FRONT LOW: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER(1, 2): OFF/ON
SW CHANNEL: Mono/Stereo*
2
Only for the initial startup:
1
Press the [FUNC.] or [Rotary encoder].
The Output System selection screen is displayed. Go to
Step 3.
01GB00PXAH800.book Page 37 Tuesday, February 8, 2011 9:04 PM
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alpine RUX-C800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alpine RUX-C800 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info