471407
38
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
36-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
Adjust the MX Plus level. In the Ai-NET mode, the adjustment is
performed for the current source (Initial setting: “OFF” / “Non Effect”).
When an Ai-NET compatible head unit is connected:
Setting item: DVD: OFF/Cinema/Action/Music
AUX/Others: OFF/Compressed/Music/
DVD
CD/Compressed Data/FM/Digital Radio:
OFF/Level1/Level2/Level3
When an Ai-NET compatible head unit is not connected:
Setting item: Non Effect/Compressed 1/Compressed 2/
Compressed 3/Music 1/Music 2/Music 3/
Cinema/Action/Drama/Talk
For MX Plus, refer to “Setting the MX Plus (Ai-NET Mode)”
(page 44) and “Setting the MX Plus (Standalone Mode)” (page 45).
Adjust the Right and Left speaker volume (Initial setting: “0”).
Setting contents: L (Left) 15 to 0 (Center) to R (Right) 15
When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit and you cannot set them on the
unit itself.
Adjust the Front and Rear speaker volume (Initial setting: “0”).
Setting contents: F (Front) 15 to 0 (Center) to R (Rear) 15
When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit and you cannot set them on the
unit itself.
When is set to “ON”, the settings for ImprintEQ, Graphic EQ,
Parametric EQ, MX Plus, RoadEQ, and Time Collection are restored to
the initial values (Initial setting: “OFF”).
Setting contents: ON/OFF
Adjust the volume (Initial setting: “- dB”).
Setting contents: - to 0.0 dB
When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit and you cannot set them on the
unit itself.
Switching the Sources
The unit accepts up to five analog signal input lines and 2 digital signal
input lines. For the connection, refer to the installation manual.
When an Ai-NET compatible head unit is connected, the source should
be switched at the head unit. This feature is disabled on the Commander.
1
Press [SOURCE].
Each push switches the source.
AUX1 AUX2 AUX3 Ai-NET(HU) Ai-NET(CHG)
DIGITAL1 DIGITAL2 AUX1
The number of analog signal inputs varies depending on the setting
in “Setting the AUX Input System (AUX Input Setup)” (page 39).
Only the sources set as ON in “Setting the AUX Input (AUX IN)”
(page 39) and “Setting the Digital Input (Digital AUX)” (page 40)
are displayed.
Names selected in “Naming the AUX Input (AUX Name)” (page 41)
are displayed as the source names.
Storing the Preset Values (Preset Store)
You can store up to 6 sets of the adjustment/setting values. All of the
following adjustment/setting values are stored in a single preset
memory.
1
Adjust the value you want to store and set it.
2
Press [FUNC.].
3
Rotate the [Rotary encoder] to select “Preset,” and
then press the [Rotary encoder].
4
Rotate the [Rotary encoder] to select “Store,” and
then press the [Rotary encoder].
Adjusting the MX Plus Level (MX PLUS
SETUP/LEVEL ADJUSTMENT)
Adjusting Balance (Between Left and
Right) (BALANCE)
Adjusting Fader (Between Front and Rear)
(FADER)
Setting Defeat (DEFEAT)
Adjusting Volume (VOLUME)
Adjustment/Setup items Pages
Setting the Speaker System (System Select) 37
Setting the Speakers(Speaker Setup) 38
Setting the Subwoofer Output (SW Channel) 38
Setting the AUX Input System (AUX Input Setup) 39
Setting the AUX Input (AUX IN) 39
Setting the Digital Input (Digital AUX) 40
Setting the AUX Volume Input Level (AUX IN Gain) 40
Adjusting the AUX Volume Level (AUX Level) 40
Naming the AUX Input (AUX Name) 41
Turning ImprintEQ On/Off 42
Turning RoadEQ On/Off 43
Setting the MX Plus (Ai-NET Mode) 44
Setting the MX Plus (Standalone Mode) 45
Setting the Equalizer Mode (EQ Mode) 46
Setting the Graphic EQ 46
Setting the Parametric EQ 47
Adjusting X-Over and Switching the Phases 49
Adjusting the Time Correction (TCR) 50
Setting the 2-Channel Signal Playback Mode (Mode) 52
Setting EUPHONY (EUPHONY) 52
Using Dolby Pro Logic II (Dolby PLII) 53
Adjusting the Center Width (Center Width) 53
Adjusting the Speaker Volume Level (Output Level) 54
Adjusting the Acoustic Image (BI-PHANTOM) 55
Mixing the Low Range Audio for the Rear (Rear Mix) 55
Mixing the Low Range Audio of the Center with the Front
L/R (Center Bass Split)
56
Setting the Linear PCM (PCM Mode) 56
Achieving Powerful High Volume Sound (Listening Mode) 56
Adjusting the DVD Level (DVD Level) 57
01GB00PXAH800.book Page 36 Tuesday, February 8, 2011 9:04 PM
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alpine RUX-C800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alpine RUX-C800 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info