803219
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Read and keep the instructions. All the safety and
operating instructions should be read before use.
To use your parent unit and baby unit together, you must
be able to establish a radio link between them.
The range will be affected by environmental conditions.
Any large metal objects, reinforced concrete, other solid
structures, radio or electrical equipment between the
baby and parent unit may block the radio signal.
The use of other 2.4GHz products may cause
interference with this product, so keep the baby unit away
at least 1.5 meter from these type of products or turn the
products off if they appear to be caused interference.
This device can’t replace responsible adult supervision.
This device is designed for indoor use only.
The units should not be exposed to rain or moisture.
The units should not be exposed to direct heat sources.
This product is not a toy and should be kept out of
children’s reach.
This product contains small parts, take care when unpac-
king and assembling the product.
Children can become entangled in the cords, therefore
power cords should be kept more than 1 meter away
from the crib and baby’s reach at all times.
The baby units with power cords should never be hung
on or near the crib.
The units should only be used with the AC power
adapters included in this package (rated 5V; 1.0A).
Improper or incorrect use of batteries may cause
corrosion or battery leakage, which could cause personal
injury or damage to property. Use only the types of the
batteries which are indicated in this manual.
Don’t use the units if the cord or plug is damaged.
Don’t attempt to repair or adjust any of the electrical or
mechanical functions of the unit, if you do, the guarantee
will be made void.
This product should not be used on or under surfaces
that may block the ventilation openings.
This product must not be placed in an enclosed area that
may impede the air ow.
2. MODE OPERATION
2.1 Power save/screen off
Short press power key to turn on/off the screen of the
parent unit.
2.2 Volume adjustment
Press the UP key to increase the volume. Press the
DOWN key to decrease the volume.
2.3 Brightness adjustment
Press the RIGHT key to increase the brightness.
Press the LEFT key to decrease the brightness.
2.4 Baby unit view/scan (in case of 2 baby units)
Press the scan key / to view/scan the baby units.
During the scan mode, the scan icon will be displayed
on top of the screen. Each baby unit video will stay on the
screen for about 10 seconds, after the 10 seconds another
baby unit video will display on the parent unit etc.
2.5 Digital zoom & move the screen.
Press and hold the key zoom / for about 2 seconds to
operate the zoom in/out function.
After you’ve zoomed in, press the LEFT key to pan left,
press the RIGHT key to pan right, press the UP key to
tilt up and press the DOWN key to tilt down. During the
digital zoom mode, the icon 2 will be displayed on top of
the screen.
Note 1: The baby unit doesn’t move by operating the pan/
tilt function.
Note 2: If you want to adjust the volume/brightness, you
have to exit the zoom mode before you can operate it.
2.6 Talk to the baby
To talk, press and hold the talk / key. The microphone
icon will be displayed in the lower right corner of the screen
while this function is activated.
Release the button when you don’t want to talk anymore. Now
you can listen to the baby’s room.
Note: Bear in mind that you can’t listen to your baby whilst
youre talking. If you want to listen to the baby, you have to
stop pressing this button.
2.7 Infrared night vision (automatic)
The infrared night vision function allows the baby unit to pick
up images of your baby or the monitored area in dark or low
light conditions. In this mode, only black and white images will
be displayed on the parent unit. The optimum image is 1.8m / 6
feet distance between the baby unit and object. When the baby
unit is in night vision mode, the icon will be displayed on top
of the screen. This will take a few seconds.
3. MENU OPERATION
3.1 Pairing the baby unit and parent unit
The baby unit is pre-registered to your parent unit. You
don’t need to register it again unless the baby unit loses
its link with the parent unit. To re-register your baby unit, or
register a new baby unit, follow the instructions below.
Note: Before you begin pairing, be sure to have the
parent unit and baby unit side by side.
1. Press the MENU/OK key. The menu will pop up.
2. Press the LEFT key or RIGHT key until the icon is
highlighted.
3. Press the MENU/OK key.
4. Press the UP key or DOWN key to select ADD CAM
then press the MENU/OK key.
5. While the hourglass icon is displayed, press the PAIR
button on the back of the baby unit.
6. Once paired, it will display on the LCD screen.
7. If unsuccessful, please repeat the above steps.
8. Press the key to exit.
3.2 Delete a baby unit
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the baby unit
icon is highlighted.
3. Press the MENU/OK key to conrm.
4. Press the UP key or DOWN key to select DEL CAM
then press MENU/OK key.
5. Press the LEFT key or RIGHT key to select the
check mark .
6. Press MENU/OK key to conrm the option.
7. Press the BACK key to exit.
3.3 VOX setting / ECO Mode
This mode allows you to control the sound activation of
your baby unit and switch on the ECO mode. If there is no
sound around the baby unit within 30 seconds, the sound
transmission stops and the picture turns black. When the
baby unit detects any sounds louder than the sensitivity
level, the sound and image will turn on again. To change
the VOX level, please follow the below instructions.
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the VOX icon
is highlighted. Press the MENU/OK key. Then press the
UP key or DOWN key to select the desired level.
3. Press the MENU/OK key to conrm.
4. Press the BACK key to exit.
Note 1: Once the VOX is turned on, the VOX icon ,
or will display on top of the screen.
Note 2: is Low sensitivity. The baby have to make a
lot of sound before the VOX function will be activated.
is High sensitivity level. The baby don’t have to make
a lot of sound before the VOX function will be activated.
Note 3: ECO mode does not work with 2 or more baby
units.
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto
DVM135 is in compliance with directive 2014/53/EU. The full text of the EU decla-
ration of conformity is available at the following internet address: http://DOC.hesdo.
com/DVM135-DOC.pdf
3.4 Temperature unit setting
1. Press the MENU/OK key. The menu will pop up.
2. Press the LEFT key or RIGHT key until the
temperature icon is highlighted. Press the MENU/OK key.
3. Navigate with the arrows to select or .
4. Press the MENU/OK key to conrm.
5. Press the BACK key to exit.
Note: For this unit, the environment test temperature range
is 0-40 .
Environment temperature alarm setting
1. In the menu, go to the icon. Press the MENU/OK button.
2. Use the arrows to turn the alarm on or off . Press
the MENU/OK button to conrm.
3. Navigate with the arrows to move to the alarm tempera-
ture values. Icon is the lowest temperature value. Icon
is the maximum temperature value.
Press the UP key or DOWN key to adjust the maxi-
mum environment temperature alarm value. After it is set,
press the MENU/OK key to conrm.
When the highest temperature alarm value is set, it will
automatically jump to the lowest temperature alarm value
set. Now, the low temperature alarm value appears in a red
box, press the UP key or DOWN key to make lowest
environment temperature alarm value adjustment, then
press the MENU/OK key to conrm. The system returns to
the beginning automatically. If you don’t want to change the
temperature value, press the BACK key to exit.
Note: The high temperature alarm range is from
4-40 . The low temperature is from 0-36 .
The temperatures cannot be closer than 4 difference.
3.5 Lullaby setting
You can soothe the baby to sleep by playing a gentle
lullaby from the baby unit.
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the lullaby
icon is highlighted. Press the MENU/OK key.
3. Navigate with the arrows to select 1 of the 8 lullabies.
4. Press the MENU/OK key to conrm.
5. Press the BACK key to exit.
Note 1: Once the lullaby is turned on, the lullaby icon
will display on top of the screen.
Note 2: The lullaby default setting is OFF.
Note 3: Lullaby loop playing function will play all the
lullabies one by one.
3.6 Alarm setting
You can use the alarm to remind yourself to feed your baby
/ change diaper / sleep, etc.
1. Press the MENU/OK key and the menu will pop up.
2. Press the LEFT key or RIGHT key until the alarm
icon is highlighted. Press the MENU/OK key.
3. Navigate with the arrows to select the desired time
interval.
4. Press the MENU/OK key to conrm.
5. Press the BACK key to exit.
Note 1: The minimum alarm setting is 0.5 hour. The
maximum alarm setting is 5 hours. In total there are 8
levels.
Note 2: Once the alarm is turned on, the alarm icon
will display in the lower left corner of the screen.
Note 3: The alarm default setting is OFF.
Note 4: When the alarm is ringing, press any key on the
parent unit to turn the alarm off.
Note 5: If you don’t turn off the alarm, the alarm will ring
for 1 minute. After three minutes the alarm will ring again
for 1 minute. The alarm will ring for three times in total,
after this the alarm goes off.
4. TROUBLE SHOOTING
No reception
on the parent unit The power adapters may not be properly connected.
Conrm that the baby unit and parent unit are ON.
The baby unit may be too far away from the parent
unit.
The baby unit and parent unit may not be properly
paired. Follow §3.1.
Interference or poor
reception Move the parent unit closer to the baby unit.
The baby unit or parent unit may be placed too
close to metal objects.
Other electronic devices may be interfering with the
signal. Turn off those devices.
The battery power may be too low.
Howling (static,
screeching) The baby unit and parent unit may be placed too
close together.
The volume on the parent unit may be set too high.
Can’t hear the baby
on the parent unit Volume setting may be too low.
Image frozen Restart the baby unit (plug out the adapter, then
plug it into the socket again).
Press the reset key at the back of the parent unit.
5. SPECIFICATIONS
Frequency 2.4GHz FHSS
Frequency range 2412 - 2469 MHz
Maximum power <19 dBm
Operating Range Indoor: Up to 50 meters
Outdoor: Up to 300 meters
(straight line and open space)
LCD 3.5” TFT LCD
Operating time with
battery fully charged
Up to 10 hours (VOX on)
Display
resolution
352x264 RGB
Rechargeable batte-
ry for parent unit
Li-polymer battery pack
3.7V; 2000mAh; 4.70Wh
Operating environ-
ment
Temperature: 0°C to 40°C (32°F to 104°F)
Relative humidity: 15% - 85%
Storage
environment
Temperature: -20°C to 70°C (-4°F to 158°F)
Relative humidity: 15% - 85%
Power adapter Model: K05S050100G
Power adapter input Input: 100-240VAC~50/60Hz 0.2A
Output: 5.0V DC, 1.0A
Output power 5.0 W
Average active
efficiency
73.7%
Efficiency at low
10% load
-
No load Power
consumption
0.1 W MAX
1. WARNINGS & SAFETY INSTRUCTIONS
EN
v1.1
www.alectobaby.nl
DVM135BK
DVM135
Commaxx BV
Wiebachstraat 37
6466 NG, Kerkrade
The Netherlands
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Alecto DVM-135 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Alecto DVM-135 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1.51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info