730079
69
Verklein
Vergroot
Pagina terug
1/191
Pagina verder
Chapter 8 Wireless LAN
LTE3316-M604 User’s Guide
69
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
Refer to the Connection Wizard chapter for more information on channels. This option is only
available if Auto Channel Selection is disabled.
Auto Channel
Selection
Select this check box for the LTE to automatically choose the channel with the least
interference. De-select this check box if you wish to manually select the channel using the
Channel Selection field.
Operating
Channel
This displays the operating frequency/channel depending on your particular region.
Channel Width Select the wireless channel width used by LTE.
A standard 20 MHz channel(HT20) offers transfer speeds of up to 144 Mbps (2.4G) or 217 Mbps
(5G) whereas a 40 MHz channel(HT40) uses two standard channels and offers speeds of up to
300 Mbps (2.4G) or 450 Mbps (5G). An IEEE 802.11ac-specific 80 MHz channel (HT80) offers
speeds of up to 1.3 Gbps.
Because not all devices support 40 MHz and/or 80 MHz channels, select Auto to allow the LTE
to adjust the channel bandwidth automatically.
HT40 (channel bonding or dual channel) bonds two adjacent radio channels to increase
throughput. A HT80 channel consists of two adjacent 40 MHz channels. The wireless clients
must also support HT40 or HT80. It is often better to use the 20 MHz setting in a location where
the environment hinders the wireless signal.
Select HT20 if you want to lessen radio interference with other wireless devices in your
neighborhood or the wireless clients do not support channel bonding.
802.11 Mode In Wireless Setup for 2.4G network you can select from the following:
802.11b Only: allows either IEEE 802.11b compliant WLAN devices to associate with the LTE.
In this mode, all wireless devices can only transmit at the data rates supported by IEEE
802.11b.
802.11g Only: allows IEEE 802.11g compliant WLAN devices to associate with the Device.
IEEE 802.11b compliant WLAN devices can associate with the LTE only when they use the
short preamble type.
802.11n Only: allows IEEE 802.11n compliant WLAN devices to associate with the LTE. This
can increase transmission rates, although IEEE 802.11b or IEEE 802.11g clients will not be
able to connect to the LTE.
802.11b/g Mixed: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to
associate with the LTE. The LTE adjusts the transmission rate automatically according to the
wireless standard supported by the wireless devices.
802.11g/n Mixed: allows either IEEE 802.11g or IEEE 802.11n compliant WLAN devices to
associate with the LTE. The transmission rate of your LTE might be reduced.
802.11b/g/n Mixed: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN
devices to associate with the LTE. The transmission rate of your LTE might be reduced.
In Wireless Setup for 5G network you can select from the following:
802.11a Only: allows only IEEE 802.11a compliant WLAN devices to associate with the LTE.
802.11n Only: allows IEEE 802.11n compliant WLAN devices to associate with the LTE. This
can increase transmission rates, although IEEE 802.11a clients will not be able to connect
to the LTE.
802.11a/n Mixed: allows both IEEE802.11n and IEEE802.11a compliant WLAN devices to
associate with the LTE. The transmission rate of your LTE might be reduced.
802.11a/n/ac Mixed: allows both IEEE802.11a, IEEE802.11n and IEEE802.11ac compliant
WLAN devices to associate with the LTE. The transmission rate of your LTE might be
reduced.
Security - 2.4G / Security - 5G
Table 18 Configuration > Network > Wireless LAN > General (continued)
LABEL DESCRIPTION
69

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ZyXEL LTE3316-M604 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ZyXEL LTE3316-M604 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van ZyXEL LTE3316-M604

ZyXEL LTE3316-M604 Snelstart handleiding - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info