644523
24
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
24
2.5.4 Controlling the belt
NEVER try to control the belt at running
engine. This leads to serious injuries on
your hand.
Remove the safety cover. It is fixed on
the ZI-RPE60 with two six-head screws
and on the ZI-RPE90 with four six-head
screw.
The belt tension is right when you can
push it in the middle 10-15 mm in.
After controlling you must mount the
safety cover again.
A loose belt reduces the power. This
leads to a less powerful tamping and it
can also cause early deterioration of the
belt.
When the belt is battered you must
change it immediately.
2.5.5 Changing the belt
Remove the safety cover.
Loosen the belt by loosening the screw
with which the engine block is fixed on
the plate. Now you can slide the engine
block in the grooves and so you can
loosen the belt.
Let a wrench latch into the screw of the
belt (below). Turn the wrench anti-
clockwise so that the belt becomes unfas-
tened.
Let the belt latch in the lower vibration
belt and move it to the left side of the
upper clutch. Turn the wrench so that the
belt gets placed back.
2.5.6 Tensioning the belt
Tension the belt by sliding the engine
block on the plate. For this you can use a
six-head adjusting screw which is front-
wards on the side of the engine block.
The tension is correct when the distance
between your fingers is 10 to 15 mm
when you push the belt in the middle to-
gether.
2.5.7 Controlling the clutch
You have to control the clutch at the same
time when you control the belt. When the
belt is removed you must control the outer
barrel. Clean the V-groove, if necessary.
When the shoe is battered, the power trans-
mission will be bad and the belt will slip.
2.5.8 Transport
For the transport of short ways you can use
the wheels of the machine. For long ways
you have to pack the handle and the safety
rack separately to safe place. Then you have
to place it on a transport vehicle where you
also have to fix the machine.
2.5.9 Refuelling
The machine is run by unleaded petrol.
Ensure yourself that no particles get into
the fuel tank when refuelling, so always
use a filter.
Use unleaded petrol because it is better for
the environment than leaded ones.
2.5.10 Cleaning
Clean the machine from dust, etc …
Clean the machine housing with a wet cloth
and a mild cleaning solution.
IM PORT AN T
Der Einsatz von Lösungsmitteln,
aggressiven Chemikalien oder
Scheuermitteln führt zu Sach-
schäden an der Maschine!
Daher gilt: Bei der Reinigung nur
Wasser und ggf. milde Reinigungsmit-
tel verwenden!
2.5.11 Cleaning the spark plug (Fig. I)
Take off the spark plug cap (Fig. F). Loosen
and remove the spark plug. Clean it with a
small brush from soot debris.
The contact distance shall account approx. 0,
5mm or ~ credit card thickness.
Engine
base
Oil plug
Dipstick
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zipper ZI-RPE60 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zipper ZI-RPE60 in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info