539694
56
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
62 VC1400-001_v02
Before rst use
B
1
Put the end of the suction hose to the inlet of the vacuum
cleaner. Pay attention to insert the protrusions situated on
the end of the hose into the special incisions in the inlet of
the vacuum cleaner.
2
With a clockwise movement turn the end of the suction
hose tight.
3
Attach the other end of the hose (the handle) to the
suction tube. In order to do this, press the lock A in the
telescopic suction tube and put the tube in the handle, so the
lock A is fastened in hole B.
4
Select the needed length of the telescopic suction pipe
by sliding the slider according to the arrow, and pulling the
pipe out/in.
5
Install a nozzle or a brush on the other end of the suction
pipe.
6
You may install a basket for collecting small objects in
the nozzle brush with a small object separator. In order to do
this, remove the hole plug, and insert the basket.
7
For hard surfaces (wooden oors, plastic oors, ceramic
tiling, etc.) pull out the brush by pressing the switch on the
nozzle brush as it is shown in the picture .
8
Grab the plug of the cord (3), and pull it out of the vacuum
cleaner.
Whenpulling outthecordpayattentiontothe
yellowbandwhichmarkstheendofthecord.Any
attempts tounwindthe cord further(especially
forcefullypullingonit)mayleadtodamagingit.
9
Put the plug of the cord in an electric socket.
Before turning the vacuum cleaner on, make sure the
CYKLON dust container is installed in the chamber of the
vacuum cleaner, and also the basic lter and the outlet lter
are installed in the vacuum cleaner.
10
Press the on/off button to start the vacuum cleaner.
11
The vacuum cleaner is equipped with an electronic
controller of suction power, which enables smooth regulation
of suction power of the vacuum cleaner. Turn the dial up or
down to respectively increase or decrease suction power.
Design
A
1
Outlet lter cover
2
Fastening for the nozzle brush
3
Plug with the power cord
4
Locker for the crevice nozzle
5
Fastening of the upper cover
6
ON/OFF button
7
Suction power regulation dial
8
Cord winder button
9
Handle
10
Bolt – a mechanic controller of suction power
11
Suction hose
12
Telescopic suction pipe
13
Outlet microlter (installed in the vacuum cleaner)
14
HEPA H12 basic lter (installed in the CYKLON dust
container)
15
HEPA H12 basic lter protective casing (installed in the
CYKLON dust container)
16
CYKLON dust container (a removable part of the vacuum
cleaner)
17
CYKLON dust container cover
18
Nozzle brush with a small object separator
19
Crevice nozzle
20
Small brush
21
Small nozzle
22
BNB (Brush Natural Bristle) oor brush (an additional
accessory available in retail outlets with vacuum
cleaners)
23
Turbobrush (an additional accessory available in retail
outlets with vacuum cleaners)
TYPES OF VC1400 VACUUM CLEANERS
Design and
accessory
options
Type
Max power
Suction power control
Suction pipe
Nozzle brush
Small nozzle
Crevice nozzle
Small brush
1 2 3 7 8 9 10 11
VC1400.0SF 1700 W + Telescopic + + + +
VC1400.0SK 1900 W + Telescopic + + + +
56

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Tiny VC1400.0 SK bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Tiny VC1400.0 SK in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 3,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info