539690
45
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
51
1600-016_v01
a given lter: H11 lter retains 95.5% of particles with the
size of 0.3 micron and H13 lter retains as much as 99.95%
of all pollutants.
1
The HEPA outlet air lter needs to be replaced when the
surface of the lter is dirty or the control lamp of the outlet
lter replacement indicator lights up (9) (pulsing red light).
The suction power of the vacuum cleaner will reduce to
setting 1 when the outlet lter replacement indicator lamp
lights up.
2
To replace the HEPA lter lift the vacuum cleaner handle
and open the accessory compartment.
3
Grab the outlet lter cover (8) by the two fastenings,
press rmly with the thumbs and pull it to the outside.
4
Remove the HEPA lter case and replace it with a new
one. The HEPA lter ensures an effective operation of the
vacuum cleaner for about 1 year.
Insert the cover so that the two protrusions in the lower part
of the cover are inserted in the openings of the vacuum
cleaner body, press the lter cover so that the rear fastenings
snap shot on the body.
SAFBAG dust bag disassembly/assembly
E
1
The vacuum cleaner is equipped with a safety valve
which is located in the dust container (bag) chamber. It
opens automatically when the suction hose or the elements
attached to the suction hose are completely clogged or when
the dust bag is overlled with dust. After the opening of the
valve a characteristic “uttering” in the vacuum cleaner will
be heard. The opening of the safety valve will result in the
lighting of the dust bag full indicator.
2
When the dust bag full indicator (14) lights (with the
nozzle or the brush lifted above the cleaned surface) it means
that the bag is full and needs to be replaced. In addition the
dust bag full indicator may activate if the suction hose or the
elements attached to the suction hose are clogged.
3
Switch off the vacuum cleaner by pressing the “on/off”
button (2) and unplug the appliance.
4
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
5
Release the front cover fastening (15) and open the
cover.
6
While holding the dust bag plate, gently bend it towards
the inside of the dust container chamber and remove the
whole dust bag upwards.
7
Insert the plate of the new dust bag in the tracks and
slide the plate together with the screen to the bottom of the
container, unfold the dust bag. The direction for inserting the
dust bag is indicated by the arrow on the bag.
8
Close the cover by pressing it until you hear
a characteristic click – pay attention not to trap the dust bag.
ZELMER vacuum cleaners are equipped with SAFBAG dust
bags in the amount indicated in the table. It is recommended
to replace the dust bag if:
a) the dust bag full indicator lights up,
b) the safety valve activates,
c) the vacuum cleaner operates poorly,
d) the dust bag is full.
Special accessories
The following special accessories may be purchased in retail
outlets:
Zelmer turbobrush (26)
May be used with all types of ZELMER vacuum cleaners. Is
used for an effective vacuuming of carpets and tted carpets.
While using the turbobrush follow the instruction manual.
The use of the turbobrush decidedly increases the
effectiveness of removing brous dirt such as: animal hair,
hair, threads etc. It is practically useful in households with
pets (cats, dogs), where removing the animal hair from the
carpets and oorings is very onerous.
Zelmer electrobrush (27)
Only the electrobrush manufactured by ZELMER may be
used with ZELMER vacuum cleaners. Using other brands of
electrobrushes may cause damage to the vacuum cleaner.
The electrobrush may be used with all ZELMER vacuum
cleaners equipped with the appropriate electrobrush socket.
While using the electrobrush follow the instruction manual.
The electrobrush is especially helpful in cleaning worn out
carpets. Before vacuuming remove all larger elements from
the oor such as: remains of cloth, paper etc. in order to
prevent blocking of the whirling element of the brush.
End of operation cleaning and
maintenance
1
Switch off the vacuum cleaner by pressing the “on/off”
button (2).
2
Unplug the appliance.
3
Wind the cord by pressing the cord rewind button (4).
While doing this hold the cord to make sure it is not tangled
and the plug does not hit the vacuum cleaner housing.
4
Press the two side buttons on the end of the hose and
remove the hose end from the inlet opening of the vacuum
cleaner.
5
Disconnect the telescopic tube from the nozzle or brush.
6
Disconnect the telescopic tube from the hose. In order to
remove the tube from the hose handle press the “A” locking
device and pull the tube in the direction of the arrow.
7
The vacuum cleaner may be stored horizontally. The
hose may be attached to the vacuum cleaner, however
you have to make sure that it is not excessively bent during
storing.
8
If necessary wipe the housing and the dust bag container
with a damp cloth (it may be soaked with dishwashing liquid)
and dry it or wipe until dry.
Donotuseabrasivedetergentsorsolvents.
F
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Syrius bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Syrius in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 4,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info