539690
44
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
50 1600-016_v01
Before operation make sure that the SAFBAG bag is installed
in the vacuum cleaner chamber and that inlet lter and the
HEPA outlet lter is installed in the appliance.
9
Switch on the vacuum cleaner by pressing the “on/off”
button (2).
10
The vacuum cleaner is equipped with an electronic
power control which allows to gradually adjust the vacuum
cleaner suction power during operation. To adjust the
suction power use the power adjustment buttons (10,12)
to increase the suction power or to decrease the
suction power. The suction power setting is indicated by the
appropriate number of lit diodes.
Thevacuumcleanerisequippedwithapower
level memory function. When you turn off
thevacuumcleanerusing the ON/OFFbutton
(2), the power level is going to be stored in
memory. After the vacuum cleaner is turned
onnexttime,itisgoingtostartworkingatthe
samepowerlevelithadbeenworkingbeforeit
wasturnedoff.
The suction power may be adjusted during operation.
The recommended settings are:
Setting 1 – vacuuming curtains
Setting 2 – vacuuming upholstery
Setting 3 – cost-effective power
Setting 4 – vacuuming carpets
Setting 5 – vacuuming hard oors and crevices.
The vacuum cleaner is equipped with the
adjustmentfunctionforLEDbrightnessofthe
powerlevelindicator(11)onthecontrolpanel.
In order to set a demanded LED brightness,
youhavetopressbothofthepoweradjustment
buttons (10) and (12), and when still
pressing these buttons turn on the vacuum
cleanerbypressingtheON/OFFbutton(2).The
LEDforpowerlevels1,3,and5turnon,and
the motor stays turned off. Next by pressing
thepoweradjustmentbuttons (10)and
(12)youcanrespectivelyincreaseordecrease
the brightness of power level indicator (11).
After setting a desired LED brightness, it is
necessarytoturnoffthevacuumcleanerusing
the ON/OFF button (2). In this way you leave
theLEDbrightnessadjustmentfunctionmode,
andthesetLEDbrightnesslevelisstored.
11
The vacuum cleaner type 1600.3 is additionally equipped
with remote suction power control located in the suction hose
handle. It allows to change the suction power without the
necessity to bend down.
In order to use this function, open the battery compartment
in the suction hose handle and insert two 1.5 V AAA type
batteries or two chargeable 1.2 V AAA type batteries.
Insert the batteries so that the battery pole
market“+”isalwaysdirectedtowardsthelock
ofthecompartmentmarkedwith“+”.
Use only high quality batteries. Battery leakage may
cause damage to the electronic system.
12
To use the remote control of the suction power press the
appropriate button on the hose handle ( , ):
To increase the suction power by one setting press the
button.
To decrease the suction power by one setting press the
button.
13
Press the button on the hose handle to temporarily
switch off the appliance and to operate in the STANDBY
mode.
To continue vacuuming press the STANDBY button (17) once
again. The appliance will start operating with the previously
set suction power.
The infrared transmitter and receiver have to
“see”eachotherinorderfortheremotecontrol
systemtoworkproperly.
14
The vacuum cleaner is equipped with an accessory
compartment. To open the compartment lift the vacuum
cleaner handle and pull the accessory compartment cover
(6) upwards.
15
The accessories may be attached to the accessory
holder in the suction hose handle. This way they will be
available for use at any time.
16
The vacuum cleaner is equipped with the “Parksystem”
function. This function allows to temporarily switch off the
vacuum cleaner using the fastening hook of the combination
brush without the necessity to use the on/off button. In order
to do so, during operation insert the fastening hook of the
combination brush in the combination brush fastening (5).
The vacuum cleaner will automatically switch off.
Filter disassembly
Before changing the lters make sure that the vacuum cleaner
is switched off and unplugged from the mains supply.
INLET FILTER
1
Release the front cover fastening (15) and open the
cover.
2
Slide the inlet lter (20) from the appliance body.
3
Insert the new lter making sure that the outer edge of
the lter is located to the inside of the limiting rib.
4
Close the front cover.
HEPA OUTLET FILTER
The vacuum cleaners are equipped with a HEPA (High
Efciency Particulate Air) H11, H13 outlet lter.
The lters have a high ltration capacity; they are made of
special bers which are able to retain almost all dust particles.
The H11 and H13 classes determine the permeability of
C
D
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Syrius bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Syrius in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 4,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info