669800
26
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
CAMERA CONTROLS (SINGLE MODE)
GIMBAL PITCH CONTROL (GB603 GIMBAL AND V18/CGO4 GIMBAL CAMERA)
There is a gimbal pitch mode switch on ST24---S1. When the switch is in up/middle
position, the GB603 gimbal/V18/CGO4 gimbal camera is in Angle Mode. Use the
slider (C) on the left side of the ST24 to set the pitch/tilt position of the gimbal/gimbal
camera. When the S1 is in bottom position, the gimbal/gimbal camera is in Velocity
Mode. When the slider (C) is in the middle position, it means the velocity rate is 0 for
the GB603/CGO4/V18, and it will stop pitching up/down. When the slider (C) is above
the middle position, the GB603/CGO4/V18 will start pitching up. When the slider (C)
is below the middle position, the GB603/CGO4/V18 will start pitching down. The
distance between the slider (C) and the middle position decides the velocity rate, the
further distance, the higher velocity it would be.
NOTICE: When the V18/CGO4 is attached to the TORNADO H920, the control slider
V18/CGO4 Zoom In/Out Control Slider (K6)-located on the right side of the
controller-is activated. Users can zoom in or zoom out by switching K6. When zooming
in,V18/CGO4 gimbal camera in pitch and yaw directions will become slow in the
velocity mode. When zooming out, the movement speed of the V18/CGO4 gimbal
camera in pitch and yaw directions will become fast in the velocity mode.
CAUTION:
You MUST stop recording video in order to take still photos. It will take
approximately 5 seconds to capture a still photo and before you can take another.
CAUTION: ALWAYS stop recording video before turning off the TORNADO H920/V18
/CGO4 to avoid data loss.
CAMERA/GIMBAL YAW CONTROL
There is a gimbal yaw mode switch on ST24---S2.
When the switch position is up and middle, the
gimbal/gimbal camera is in Follow Mode. The
yaw control of the gimbal/camera is now
disabled. The gimbal/camera will adjust its yaw
direction according to the aircraft’s movements.
When the switch position is down, the
gimbal/gimbal camera is in Global Mode. The
Gimbal Yaw control knob (K1) is now activated.
When the user rotates the knob in the right
direction, the gimbal/gimbal camera will rotate
to the right side, and vice versa.
Button A = Take Still Photo Button B = Start/Stop Recording Video
25
SELECT interface till a pop-up window comes out, tap 'Copy', and then select the
model newly created.
NOTICE: We recommend users to power on the aircraft in the angle mode.
NOTICE: After the camera is selected successfully, when you press [ ], you will hear
two long beeps. That means the binding is complete. The Real-time images can now
be seen on the screen.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yuneec Tornado H920 Industry bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yuneec Tornado H920 Industry in de taal/talen: Engels als bijlage per email.

De handleiding is 3,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info