669800
19
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
INSTALLING THE GB603 GIMBAL AND CAMERA
FOR THE GH4 CAMERA
STEP 1) Install the Fastening Block to the camera's flash mount.
STEP 2) Plug the HDMI cable into the camera.
STEP 3) Place the Camera Mount with lens frame downward, and fit the GH4 camera
with its lens downward.
NOTICE: Make sure the Camera Battery is fully charged
and the SD card is free of space.
STEP 4) Secure the screw on the top and at the bottom
of the frame to fix the camera on the Camera Mount.
STEP 5) Insert the HDMI cable in the corresponding
port on the camera (the right side of GH4) after
connecting the Shutter cable in the port at the top
left side of the camera through the frame.
NOTICE: It requires securing the fastening screws of
camera lens if the GB603 is with a SONY a7 lens
mount frame.
IMPORTANT NOTE: Make sure the white plug (or
with LK58 logo) connected to the port of LK58,
and the black one (or with camera logo) is
connected to the camera.When installing the
GB603 camera gimbal on the H920 copter, replace
the normal antenna with the mushroom antenna.
Connect the GB603 gimbal to the damping plate
on the H920 by turning the 4 fastening screws in a
clockwise direction, tighten them until they feel secure.
NOTICE: Be sure to mount the GB603 correctly by positioning the label "FRONT"
located on the Yaw/Top Motor toward the Front of the Aircraft.
18
FOR THE SONY α7 CAMERA
STEP 1) Replace the GH4 camera lens mount
frame with SONY α7 lens mount frame, and
secure the 10 screws on the top and bottom
of the frame to fix the frame.
STEP 2) Install the infrared ray mount device
to the left side of the SONY α7 lens mount
frame, secure the screw on the bottom of the
device, and connect the white connector to
the IR port
STEP 3) Mount the SONY α7CG balancer on
the GB603 as illustrated.
STEP 4) Install the SONY® α7 camera on the camera mount referring to the GH4
camera, there is no need to connect shutter cable for SONY® α7
STEP 1
STEP 2STEP 3
NOTICE: If using GB603 camera gimbal without SONY® α7 lens mount frame, only
GH4 camera can be mounted. If using GB603 camera gimbal with SONY® α7 lens
mount frame, both GH4 and SONY® α7 cameras can be mounted.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yuneec Tornado H920 Industry bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yuneec Tornado H920 Industry in de taal/talen: Engels als bijlage per email.

De handleiding is 3,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info