669800
17
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
HOME MODE
In Home Mode the GPS system allows the Tornado H920 to automatically fly back in a
straight line toward the direction of the last take-off position, and automatically land
within 13-26 ft (4-8m) of the pilot. This can be very helpful for first-time pilots who are
not quite ready to land the TORNADO H920 themselves. It can also be helpful for
pilots that lose orientation during flight; simply activate Home Mode until the
TORNADO H920 automatically moves toward the home position, and once you’ve
confirmed orientation switch back to Angle (Pilot) Mode. And if the TORNADO H920
ever loses the link with the ST24 it will automatically enter Home Mode.
When Home Mode is activated the TORNADO H920 will respond as follows:
A) When flying higher than 33 feet (10 meters) the TORNADO H920 will maintain the
current altitude, fly back to the home point.
B) When flying lower than 33 feet (10 meters) the TORNADO H920 will climb to 33 feet
(10 meters) while flying back to the home point.
CAUTION: You must be certain there are no obstacles in the ‘Return to Home’ flight
path otherwise the TORNADO H920 may come into contact with them and crash.
CAUTION: While the TORNADO H920 is in Home Mode you will have a limited amount
of directional control. In Home Mode, only rudder can be controlled, the aileron and
pitch can not be activated. When the copter is landing, the elevator, aileron and
rudder can be controlled. To help avoid obstacles we strongly recommend to switch to
Smart or Angle Mode (then you can switch back to Home Mode).
WARNING: Home Mode only works when the TORNADO H920 has a suitable GPS
signal/lock. If the TORNADO H920 loses GPS signal/lock it will switch to Angle (Pilot)
Mode automatically. This is why we strongly recommend learning to fly in Angle (Pilot)
Mode as soon as possible. Otherwise, if you lose GPS signal/lock and are not able to
properly control the TORNADO H920 in Angle (Pilot) Mode the aircraft may crash or
even ‘fly away’.
NOTICE: The GPS function can by turned off by Switching S3 when the aircraft is
disturbed by unknown signals.
IMPORTANT NOTE: Crash damage and ‘fly aways’ are NOT covered under warranty.
16
STEP 1
Install the CGO4 rubber dampers(4 pcs)
into the four outermost ends of the damping
carbon plates.
STEP 2 Place the damping plate right below the
damping carbon plate. Make sure the flat surface facing towards the damping carbon plate.
Damping Plate
Damping Carbon Plate Damping Plate
Damping Carbon Plate
Damping Plate
Dowels
Rubber Dampers
STEP 3 Install the four CGO4 rubber dampers (previously mentioned) into the damping plate.
STEP 4Screw the four dowels on the corresponding
rubber dampers to fix the entire damping device.
CAUTION: Make sure the damping plate is installed
correctly, otherwise the gimbal might fall off from the aircraft.
INSTALLING THE CGO4 DAMPING PLATE
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yuneec Tornado H920 Industry bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yuneec Tornado H920 Industry in de taal/talen: Engels als bijlage per email.

De handleiding is 3,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info