46 47
Set cutting time
Note: please set the time and date before any other setting operation.
Set the weekday and daytime you want by touching the information on the screen. The
currently selected days and times are framed. The Robomower will remember your settings.
Note: The Robomower will continue working on default factory settings.
Below chart showing the approx time for mowing area:
Set Signal of boundary
Firstly when you connect the boundary wire to the charging station, make sure you are aware
of which signal (S1 or S2) is generated from the charging station. Press “signal” button to
change S1 or S2.
Connector F
Connector B
Press S1 or S2 on the touch screen, make sure it same with charging station wire connection.
Cutting
Press “Start” button and close top cover, then the Robomower will start to work.
Meanwhile, the blade graphic will start to rotate.
Start
Home
Set
During the cutting time, battery capacity level is monitored and display with the reference to
the remaining voltage left.
After each charging Robomower left the charging station with full battery capacity.
This symbol means the battery has a remain capacity of 75%.
This symbol means the battery has a remain capacity of 50%.
This symbol means the battery has a remain capacity of 30%. At this capacity
level, Robomower will go back to charging station to get charged. The symbol will
display which means Robomower is now searching for charging station. And the symbol
will stop rotation, means blade stops cutting during its way back to charging station in order
to save energy.
OPERATION OPERATION
