571272
264
Verklein
Vergroot
Pagina terug
1/300
Pagina verder
Reference Utility Mode
Utility mode
264 Owner’s Manual
KBDTransCh
(Keyboard Transmit Channel) Determines the MIDI channel over which the instrument sends MIDI data (to an external sequencer, tone generator,
or other device). This parameter is available in the single-timbre tone generator mode (Voice/Performance modes).
Settings: 1~16, off
nIn the multi-timbral tone generator mode (Song/Pattern modes), MIDI data generated by playing the keyboard (and its
controllers) is sent to the internal tone generator and external devices via the MIDI output channel, set from the CHANNEL
display ([SONG] or [PATTERN] [F3] TRACK [SF1] CHANNEL).
DeviceNo. (Device Number) Determines the device number used by this synthesizer in receiving or transmitting data. This number must match
the Device Number of the external MIDI device when transmitting/receiving bulk data, parameter changes or other
system exclusive messages.
Settings: 1~16, all, off
[SF2] SWITCH
BankSel This switch enables or disables Bank Select messages, both in transmission and reception. When this is set to “on,”
this synthesizer responds to incoming Bank Select messages, and it also transmits appropriate Bank Select
messages (when using the panel).
Settings: off, on
PgmChange (Program Change) This switch enables or disables Program Change messages, both in transmission and reception. When this is set to
“on,” this synthesizer responds to incoming Program Change messages, and it also transmits appropriate Program
Change messages (when using the panel).
Settings: off, on
CtrlChange
(Control Change mode) Determines how this synthesizer receives and recognizes the AEG Sustain MIDI message. When set to mode1, it is
received as a Parameter Change. When set to mode2, it is received as a Control Change message.
Settings: mode1, mode2
LocalCtrl (Local Control On/Off) This determines whether or not the tone generator of the instrument responds to your keyboard playing. Normally,
this should be set to “on” — since you’ll want to hear the sound of the MOTIF ES as you play it. However, for external
sequencer applications, you may need to set this to “off” to avoid getting “double” notes, in which the tone generator
of the instrument is played twice — once by the keyboard and once again by the keyboard data routed through the
sequencer.
Even if this is set to “off,” the data will be transmitted via MIDI. Also, the internal tone generator block will respond to
messages received via MIDI.
Settings: off, on
RcvBulk (Receive Bulk) Determines whether or not Bulk Dump data can be received.
Settings: protect (not received), on (received)
[SF3] SYNC (Synchronization) From this display you can set various parameters related to MIDI clock and synchronization.
MIDI Sync Determines whether Song/Pattern/Arpeggio playback will be synchronized to the instrument’s internal clock or an
external MIDI clock.
Settings: internal, MIDI, MTC
internal ..............................Synchronization to internal clock. Use this setting when this synthesizer is to be used alone or as the master
clock source for other equipment.
MIDI ..................................Synchronization to a MIDI clock received from an external MIDI instrument via MIDI.
MTC (MIDI Time Code).....Synchronization to an MTC signal received via MIDI. MMC signals are transmitted via MIDI. Use this setting
when this synthesizer is to be used as a MIDI slave, such as when synchronized to an MTC-capable MTR.
The MTC Sync function is available only in the Song mode.
nPlease keep in mind that the song or pattern will not start even if you press the [F] (Play) button when the MIDI Sync is set to
other than “internal.”
nMTC (MIDI Time Code) allows simultaneous synchronization of multiple audio devices via standard MIDI cables. It includes
data corresponding to hours, minutes, seconds, and frames. This synthesizer does not transmit MTC. A device such as the
Yamaha AW4416 is necessary in order to use this synthesizer as an MTC master.
nMMC (MIDI Machine Control) allows remote control of multitrack recorders, MIDI sequencers, etc. A MMC-compatible
multitrack recorder, for example, will automatically respond to start, stop, fast forward, and fast reverse operations performed
on the controlling sequencer, thus keeping playback of the sequencer and multitrack recorder aligned.
ClockOut Determines whether MIDI clock (F8) messages will be transmitted via MIDI.
Settings: on (transmitted), off
SeqCtrl (Sequencer Control) Determines whether Sequencer Control signals – start, continue, stop, and song position pointer – will be received
and/or transmitted via MIDI.
Settings: off, in, out, in/out
off .....................Not transmitted/recognized.
in ......................Recognized but not transmitted.
out ....................Transmitted but not recognized.
in/out ...............Transmitted/recognized.
MTC StartOffset Determines the specific time code point from which sequence playback starts, when MTC is received. This feature
can be used to accurately align playback of this synthesizer with an external MTC-compatible device.
Settings: Hour : Minute : Second : Frame
Hour ................00~23
Minute .............00~59
Second ............00~59
Frame ..............00~29
264

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MOTIF ES7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MOTIF ES7 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MOTIF ES7

Yamaha MOTIF ES7 Gebruiksaanwijzing - Nederlands - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Deutsch - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Deutsch - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - English - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Français - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Français - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Italiano - 308 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Italiano - 12 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Português - 300 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Espanõl - 297 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info