Handleiding Yamaha MO8 (pagina 186 van 240) (Engels)

530341

186

Verklein

Vergroot

Pagina terug

1/240

Pagina verder

Voice mode

Performance

mode

Song mode Utility mode File mode Master mode

Pattern mode

Mixing Voice

mode

Reference

Song Job mode

186

Owner’s Manual

[F3] EVENT (Event Job)

n Before executing the Event Job, make sure that you specify the track and range (measure : beat : clock) to which the Job is applied. Please note that the track to be speciﬁed

varies depending on the Job.

01: Shift Clock

This Job shifts all data events in the speciﬁed range forward or backward by the speciﬁed number of clocks.

TR (Track)

001 : 1 : 000 – 999 : 4 : 479

Determines the track (01 – 16, TMP, SCN, all) and range of measures/beats/clocks over which the Job is

applied.

Clock Determines the amount by which the data will be delayed or advanced in measures, beats, and clocks.

Settings: 000:0:000 – 999:3:479

Direction Determines the direction in which the data will be shifted. ADVANCE moves the data toward the beginning of

the sequence, while DELAY shifts the data toward the end of the sequence.

Settings: Advance, Delay

02: Copy Event

This Job copies all data from a speciﬁed source

range to a speciﬁed destination location.

Execute this Job after setting:

• Source track (01 – 16, TMP, SCN, all)

• Source range (measure : beat : clock)

• Destination track (01 – 16, TMP, SCN, all)

• Destination range (measure : beat : clock)

• Top measure of destination

• Count (number of times data is to be copied)

NumberOfTimes Determines the number of times the data is copied.

Settings: 01 – 99

When Copy Event is executed, any data already existing at the Destination location will be overwritten.

03: Erase Event

This Job clears all speciﬁed events from the speciﬁed range, effectively producing a segment of silence.

TR (Track)

001 : 1 : 000 – 999 : 4 : 479

Determines the track (01 – 16, TMP, SCN, all) and range of measures/beats/clocks over which the Job is

applied.

Event Type Determines the event type to be erased. All events are cleared when ALL is selected. Individual control change

numbers can be speciﬁed when erasing control change events.

Settings:

When TR is set to 01 – 16: Note (Note events), PC (Program Change), PB (Pitch Bend), CC (Control Change)*, CAT (Channel

Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive), All (all events)

When TR is set to “TMP” (Tempo): TMP (tempo)

When TR is set to “SCN” (Scene): SceneMemory (Scene change information), TrackMute (Track mute setting change information)

* You can also specify the CC No. (Control Change number).

04: Extract Event

This Job moves all instances of speciﬁed event data from a speciﬁed range of a track to the same range in a

different track.

TR (Track)

001 : 1 : 000 – 999 : 4 : 479

Determines the track (01 – 16) and range of measures/beats/clocks over which the Job is applied.

EventType Selects the event type to be extracted. Speciﬁc note and control change numbers can also be speciﬁed as

required.

Settings: Note, PC (Program Change), PB (Pitch Bend), CC (Control Change), CAT (Channel Aftertouch), PAT (Polyphonic

Aftertouch), EXC (System Exclusive)

→ TR Determines the destination track (01 – 16).

05: Create Continuous Data

This Job creates continuous pitch bend or control change data over the speciﬁed range.

TR (Track)

001 : 1 : 000 – 999 : 4 : 479

Determines the track (01 – 16, TMP, all) and range of measures/beats/clocks over which the Job is applied.

EventType Determines the event type to be created.

Settings: PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch), EXC (System Exclusive), TMP (Tempo)

* You can also specify the CC No. (Control Change number).

Data (Data Range) Determines the lower and upper limits for the data range to be created. The left value is the lower limit, and the

right value is the upper limit.

Settings: When Event Type is set to PB: -8192 – +8191

When Event Type is set to TMP: 1.0 – 300.0

When Event Type is set to other: 0 – 127

Clock Determines the number of clocks to be inserted between each created event.

Settings: 001 – 999

Curve Determines the “curve” of the continuous data.

Refer to the graph for approximate curve shapes.

Settings: -16 – +16

Source track and range in measures, beats, and clocks

Destination track and the top (measure, beat, and clock)

of the destination.

CAUTION

Curve = +16 Curve = 0 (linear) Curve = -16

Start point

End point

This distance speciﬁed by Clock

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Yamaha MO8 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Yamaha MO8

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info