530341
184
Verklein
Vergroot
Pagina terug
1/240
Pagina verder
Voice mode
Performance
mode
Song mode Utility mode File mode Master mode
Pattern mode
Mixing Voice
mode
Reference
Song Job mode
184
Owner’s Manual
SwingRate Delays notes on even-numbered beats (backbeats) to produce a swing feel.
For example, if the meter is 4/4 and the quantize value is quarter notes, the 2nd and 4th beats of the measure
will be delayed. When a triplet quantize value is used, the last note of each triplet is delayed. When the
quantize value is even-numbered, beats will be delayed.
Settings: See below.
If the quantize value is 1/4 note, 8th note, 16th note, 32nd note: 50% – 75%
A setting of 100% is equivalent to twice the length of the specified quantize value. A setting of 50% produces exact
timing and therefore no swing feel. Settings above 51% increase the amount of swing, with 75% being equivalent to a
dotted-note delay.
If the quantize value is 1/4 note triplet, 8th note triplet, 16th note triplet: 66% – 83%
A setting of 100% is equivalent to three times the length of the specified quantize value. A setting of 66% produces
exact timing and therefore no swing feel. Settings above 67% increase the amount of swing, with 83% being equivalent
to a sextuplet delay.
If the quantize value is 8th note + 8th note triplet, 16th note + 16th note triplet: 50% – 66%
A setting of 100% is equivalent to twice the length of a 8th note or 16th note. A setting of 50% produces exact timing
and therefore no swing feel. Settings above 51% increase the amount of swing, with 66% being equivalent to a triplet
delay.
n If a swing value other than 100% results in notes being positioned after other non-swing notes, the latter notes are
delayed accordingly.
GateTime Determines the gate time (the length of time a note sounds) of the even-numbered backbeat notes to enhance
the swing feel. When a triplet quantize value is used, the gate time of the last note of each triplet is adjusted.
When the quantize value is 8th note + 8th note triplet or 16th note + 16th note triplet, the gate time of the even-
numbered 8th note or 16th note beats will be adjusted. A setting of 100% leaves the original gate time
unchanged. If an adjusted gate time value is less than 1, the value is rounded off to 1.
Settings: 000%–200%
02: Modify Velocity
This Job alters the velocity values of the specified range of notes, letting you selectively boost or cut the
volume of those notes. Velocity changes are calculated as follows:
Adjusted velocity = (original velocity x Rate) + Offset
If the result is 0 or less, the value is set to 1. If the result is higher than 127, the value is set to 127.
TR (Track)
001 : 1 : 000 – 999 : 4 : 479
Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
SetAll Sets the velocities of all target notes to the same fixed value (1 to 127). When set to “off” the Set All parameter
has no effect. When set to a value other than “off” the Rate and Offset parameters are unavailable and appear
as “***” on the display.
Settings: off (0), 001–127
Rate Determines the percentage by which the target notes will be shifted from their original velocities.
Settings below 100% reduce the velocities, and settings above 100% increase the velocities proportionately.
When the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.
Settings: 000% – 200%, ***
Offset Adds a fixed value to the Rate-adjusted velocity values. A setting of 0 produces no change. Settings below 0
reduce the velocities, and settings above 0 increase the velocities. When the Set All parameter is not “OFF” this
parameter appears as “***” and cannot be changed.
Settings: -127 – +127, ***
03: Modify Gate Time
This Job alters the gate times of the specified range of notes. Gate time changes are calculated as follows:
Adjusted gate time = (original gate time x Rate) + Offset
If the result is 0 or less, the value is rounded off to 1.
TR (Track)
001 : 1 : 000 – 999 : 4 : 479
Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
SetAll Sets the gate times of all target notes to the same fixed value. When set to “off” the Set All parameter has no
effect. When set to a value other than “off,” the Rate and Offset parameters are unavailable and appear as “***”
on the display.
Settings: off (0), 0001 – 9999
Rate Determines the percentage by which the gate time of the target notes will be changed.
Settings below 100% shorten the notes, and settings above 100% lengthen the notes proportionately. When the
Set All parameter (above) is set to something other than “off,” this parameter appears as “***” and cannot be
changed.
Settings: 000% – 200%, ***
Offset Adds a fixed value to the Rate-adjusted gate time values. A setting of 0 produces no change. Settings below 0
shorten the gate time, and settings above 0 lengthen the gate time. When the Set All parameter (above) is set
to something other than “off,” this parameter appears as “***” and cannot be changed.
Settings: -9999 – +9999, ***
04: Crescendo
This Job lets you create a crescendo or decrescendo over the specified range of notes. (Crescendo is a
gradual increase in volume, and decrescendo is a gradual decrease.)
TR (Track)
001 : 1 : 000 – 999 : 4 : 479
Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
VelocityRange Determines the intensity of the crescendo or decrescendo. The velocity values of the notes in the specified
range are gradually increased or decreased starting at the first note in the range. The velocity of the last note in
the range becomes the original velocity of the note plus the Velocity Range value. If the resultant velocity is
outside the 1 – 127 range, it is set to 1 or 127 accordingly. Settings greater than 0 produce a crescendo, and
settings less than 0 produce a decrescendo. A setting of 0 produces no effect.
Settings: -127 – +127
184

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MO8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MO8 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MO8

Yamaha MO8 Gebruiksaanwijzing - Deutsch - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Français - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Português - 240 pagina's

Yamaha MO8 Gebruiksaanwijzing - Espanõl - 240 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info