48728
75
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
75
Appendix
2. SYSTEM MESSAGES
System messages are the data related to the overall system of the device.
2.1 System Exclusive Messages
System Exclusive messages control various functions of the CS2x,
including master volume and master tuning, tone generator mode,
effect type and various other parameters.
2.1.1 General MIDI Mode On
When General MIDI mode on is received, the tone generator mode
will be changed to XG mode.
When this happens, the CS2x will receive the MIDI messages
which are compatible with GM System Level 1, and consequently
will not receive NRPN and Bank Select messages.
Since approximately 50ms is required to execute this message, be
sure to leave an appropriate interval before the subsequent
message.
F0 7E 7F 09 01 F7 (Hexadecimal)
2.1.2 Master Volume
When received, the Volume MSB will be effective for the System
Parameter.
F0 7F 7F 04 01 ll mm F7 (Hexadecimal)
* mm(MSB) = appropriate volume value, ll(LSB) = ignored
2.1.3 XG System On
When this data is received, the CS2x will switch to XG mode and
all the parameters will be initialized accordingly, and XG-
compatible messages such as NRPN and Bank Select messages can
be received.
Since approximately 50ms is required to execute this message, be
sure to leave an appropriate interval before the subsequent
message.
F0 43 1n 4C 00 00 7E 00 F7 (Hexadecimal)
*n = device number
TG300B Reset
F0 41 1n 42 12 40 00 7F 00 41 F7 (Hexadecimal)
*n = device number
2.1.4 Performance Mode On
F0 43 1n 63 50 00 06 03 F7 (Hexadecimal)
*n = device number
2.2 Active Sensing
Once FE (Active Sensing) has been received, if no MIDI data is
subsequently received for longer than an interval of approximately
300msec, the CS2x will perform the same function as when All Sounds
Off, All Notes Off, and Reset All Controllers messages are received, and
will then return to a status in which FE is not monitored.
Refer to the MIDI Data Format in the “Data List” book for more
information on the various messages.
1.2.24.2 Reset All Controllers (Control #121)
The values of the following controllers will be reset to the
defaults.
1.2.24.3 All Notes Off (Control #123)
Clears all notes currently on for the specified channel.
However, if Hold1 or Sostenuto is on, notes will continue
sounding until these are turned off.
1.2.24.4 Mono (Control #126)
Performs the same function as when an All Sounds Off message
is received, and if the 3rd byte (mono number) is in the range
of 0 - 16, sets the corresponding channel to Mono Mode (Mode
4 : m = 1).
1.2.24.5 Poly (Control #127)
Performs the same function as when an All Sounds Off message
is received, and sets the corresponding channel to Poly Mode
(Mode 3).
1.3 Program Change
Messages which determine which voice to select for each Part.
With a combination of Bank Select, you can select not only basic voice
numbers, but also variation voice bank numbers.
1.4 Channel Aftertouch
Messages which let you control the sounds by the pressure you apply to
the keys after the initial striking of the keys, over the entire channel.
1.5 Polyphonic Key Pressure
Messages which let you control the sounds by the pressure you apply to
the keys after the initial striking of the keys, for each individual key.
1.6 Pitch Bend
Pitch Bend messages are continuous controller messages that allow the
pitch of designated notes to be raised or lowered by a specified amount
over a specified duration.
CONTROLLER VALUE
Pitch Bend Change 0 (center)
Aftertouch 0 (off)
Modulation 0 (off)
Foot Controller 0 (min)
Expression 127 (max)
Hold1 0 (off)
Portamento 0 (off)*
Sostenuto 0 (off)
Soft Pedal 0 (off)
Portamento Control Cancels the Portamento source key number
RPN Number not specified; internal data will not change
NRPN
* In Performance mode, 1 (on).
Number not specified; internal data will not change
cCS2x_App 12/10/98 5:15 PM Page 75
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha CS2X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha CS2X in de taal/talen: Engels als bijlage per email.

De handleiding is 2,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha CS2X

Yamaha CS2X Gebruiksaanwijzing - Nederlands - 108 pagina's

Yamaha CS2X Gebruiksaanwijzing - Deutsch - 78 pagina's

Yamaha CS2X Gebruiksaanwijzing - Français - 78 pagina's

Yamaha CS2X Gebruiksaanwijzing - Português - 130 pagina's

Yamaha CS2X Gebruiksaanwijzing - Espanõl - 79 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info