48728
74
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
74
Appendix
1.2.23 RPN (Registered Parameter Number)
LSB (Control #100)
RPN (Registered Parameter Number)
MSB (Control #101)
Messages which offset, or add or subtract values from a Part’s pitch
bend sensitivity, tuning, or other parameter settings.
First send the RPN MSB and RPN LSB to specify the parameter
which is to be controlled. Then use 1.2.21 Data
Increment/Decrement to set the value of the specified parameter.
Note that once the RPN has been set for a channel, subsequent data
entry will be recognized as the same RPN’s value change. Therefore
after you use the RPN, you should set a Null (7FH, 7FH) value to
avoid an unexpected result.
The following RPN numbers can be received.
1.2.24 Channel Mode Messages
The following Channel Mode Messages can be received.
1.2.24.1 All Sounds Off (Control #120)
Clears all sounds currently sounding on the specified channel.
However, the status of channel messages such as Note On and
Hold On is maintained.
2nd BYTE 3rd BYTE MESSAGE
120 0 All Sounds Off
121 0 Reset All Controllers
123 0 All Notes Off
126 0 ~ 16 Mono
127 0 Poly
RPN MSB RPN LSB PARAMETER
00H 00H Pitch Bend Sensitivity
00H 01H Fine Tune
00H 02H Coarse Tune
7FH 7FH Null
NRPN MSB NRPN LSB
01H 08H
01H 09H
01H 0AH
01H 20H
01H 21H
01H 24H
01H 30H
01H 31H
01H 34H
01H 35H
01H 63H
01H 64H
01H 66H
14H rr
15H rr
16H rr
17H rr
18H rr
19H rr
1AH rr
1CH rr
1DH rr
1EH rr
1FH rr
24H rr
30H rr
31H rr
34H rr
35H rr
PARAMETER
Vibrato Rate
Vibrato Depth
Vibrato Delay
Low Pass Filter Cutoff Frequency
Low Pass Filter Resonance
High Pass Filter Cutoff Frequency
EQ Bass Gain
EQ Treble Gain
EQ Bass Frequency
EQ Treble Frequency
EG Attack Time
EG Decay Time
EG Release Time
Drum Low Pass Filter Cutoff Frequency
Drum Low Pass Filter Resonance
Drum EG Attack Rate
Drum EG Decay Rate
Drum Instrument Pitch Coarse
Drum Instrument Pitch Fine
Drum Instrument Level
Drum Instrument Panpot
Drum Instrument Reverb Send Level
Drum Instrument Chorus Send Level
Drum Instrument Variation Send Level
Drum High Pass Filter Cutoff Frequency
Drum EQ Bass Gain
Drum EQ Treble Gain
Drum EQ Bass Frequency
Drum EQ Treble Frequency
*rr=Note number for each drum voice instrument.
1.2.17 Portamento Control (Control #084)
Messages which apply a portamento between the currently-
sounding note and the subsequent note.
Portamento Control is transmitted specifying the note-on key of the
currently-sounding note.
Specify a Portamento Source Key number between 0 - 127.
When a Portamento Control message is received, the currently
sounding pitch will change with a Portamento Time of 0 to the next
note-on key on the same channel.
For example, the following settings would apply a portamento from
note C3 to C4.
90H 3CH 7FH C3 Note on
B0H 54H 3CH Source key number set to C3
90H 48H 7FH C4 Note on (When C4 is on, C3 is raised by a
portamento to C4.)
1.2.18 Effect1 Depth (Reverb Send Level)
(Control #091)
Messages which adjust the send level for the Reverb effect.
1.2.19 Effect3 Depth (Chorus Send Level)
(Control #093)
Messages which adjust the send level for the Chorus effect.
1.2.20 Effect4 Depth
(Variation Effect Send Level)
(Control #094)
Messages which adjust the send level for the Variation effect.
If Variation effect uses System effect, this message sets the send level
for the Variation effect. If it uses Insertion effect, this setting is
invalid.
1.2.21 Data Increment (Control #096)
Decrement (Control #097) for RPN
Messages which increase or decrease the MSB value of pitch bend
sensitivity, fine tune, or coarse tune in steps of 1. You are required
to assign one of those parameters using the RPN in the external
device in advance.
The data byte is ignored.
When the maximum value or minimum value is reached, the value
will not be incremented or decremented further.
(Incrementing the fine tune will not cause the coarse tune to be
incremented.)
1.2.22 NRPN
(Non-Registered Parameter Number)
LSB
(Control #098)
NRPN (Non-Registered Parameter Number)
MSB (Control #099)
Messages which adjust a voice’s vibrato, filter, EG, drum setup or
other parameter settings.
First send the NRPN MSB and NRPN LSB to specify the parameter
which is to be controlled. Then use 1.2.4 Data Entry to set the value
of the specified parameter.
Note that once the NRPN has been set for a channel, subsequent
data entry will be recognized as the same NRPN’s value change.
Therefore, after you use the NRPN, you should set a Null (7FH,
7FH) value to avoid an unexpected result.
The following NRPN numbers can be received.
cCS2x_App 12/10/98 5:15 PM Page 74
74

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha CS2X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha CS2X in de taal/talen: Engels als bijlage per email.

De handleiding is 2,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha CS2X

Yamaha CS2X Gebruiksaanwijzing - Nederlands - 108 pagina's

Yamaha CS2X Gebruiksaanwijzing - Deutsch - 78 pagina's

Yamaha CS2X Gebruiksaanwijzing - Français - 78 pagina's

Yamaha CS2X Gebruiksaanwijzing - Português - 130 pagina's

Yamaha CS2X Gebruiksaanwijzing - Espanõl - 79 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info