517044
290
Verklein
Vergroot
Pagina terug
1/308
Pagina verder
MIDI-Datenformat 289
01V—Bedienungsanleitung
PARAMETER VALUE REQUEST (type 0x00:edit
buffer, 0x01:sysytem memory)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this message will be echoed
if the device itself did not receive the message.
When this message is received, the value of the specified parameter
will be transmitted as a Parameter Change message.
Transmission
When [Parameter Change ECHO] is ON, this message will be trans-
mitted without change if the device itself did not receive the message.
The system memory will depend on the address, as follows.
PARAMETER CHANGE (type 0x02:function call)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this message will be ech-
oed.
When this message is received, the corresponding mem-
ory/library/table will be recalled/stored/cleared.
* [0x00:scene recall] is transmitted only when a program which is not
assigned to the program change table has been recalled. In other
cases, a program change will normally be transmitted.
PARAMETER CHANGE (type 0x02:function
call(title))
Reception
When [Parameter Change RX] is ON and the [Rx CH] matches the
Device Channel included in the SUB STATUS, this message will be
received.
When [Parameter Change ECHO] is ON, this message will be ech-
oed.
When this message is received, the title of the corresponding mem-
ory/library will be modified.
Transmission
Parameter Change messages are transmitted on the [Rx CH] channel
in response to a request.
If 01V receives a bulk request for an empty memory, TITLEs are not
transmitted.
PARAMETER VALUE REQUEST (type 0x02:function
call(title))
Reception
When [Parameter Change RX] is ON and the [Rx CH] matches the
Device Channel included in the SUB STATUS, this message will be
received.
When [Parameter Change ECHO] is ON and the 01V itself did not
receive the message, the message will be echoed.
When this is received, the title of the corresponding memory/library
will be transmitted.
Transmission
When [Parameter Change ECHO] is ON and the 01V itself did not
receive the message, the message will be echoed.
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0011nnnn 3n parameter request n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00tttttt tt 00:edit buffer, 01:system memory (type)
DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address
0aaaaaaa dd1 address( L) low 7 bits of 14 bits address
0ddddddd dd count
EOX 11110111 F7 End Of Exclusive
0x0000 - 0x007F : setup memory(128byte)
0x0080 - 0x0147 : backup memory(200byte)
0x0200 : card type(1byte)
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000010 02 function call
DATA 0ddddddd dd0 function
0ddddddd dd1 number
0ddddddd dd2 channel
EOX 11110111 F7 End Of Exclusive
function number channel Tx/Rx
-----------------------------------------------------------------------------------------
0x00 scene recall 0-99(memory 0-99) 0x7f Tx* /Rx
0x01 eq lib recall 0-79(library 1-80) 0-19,22 Tx/Rx
0x02 dyn lib recall 0-79(library 1-80) 0-13,16-19,22 Tx/Rx
0x03 eff lib recall 0-98(library 1-99) 0,1 Tx/Rx
0x10 scene store 1-99(memory 1-99) 0x7f Rx only
0x11 eq lib store 40-79(library 41-80) 0-19,22 Rx only
0x12 dyn lib store 40-79(library 41-80) 0-13,16-19,22 Rx only
0x13 eff lib store 42-98(library 43-99) 0,1 Rx only
Channel 0-11(ch1-12), 12-13(13/14-15/16), 14-15(return 1-2),
16-19(aux 1-4), 22(st mas), 23-30(ch17-24)
0,1(EFF1,2 for eff lib recall/store), 0x7f(current/edit
buffer)
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change or response
n=0-15(Device Channel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000010 02 function call
DATA 0ddddddd dd0 function
0ddddddd dd1 number
0ddddddd dd2 title1(If data is empty, TITLEs are not
transmitted.)
: :
0ddddddd ddn title-n
EOX 11110111 F7 End Of Exclusive
function number
---------------------------------------------------------------------------------------------
0x30 scene title 0-99(mem 0-99),0x7f(edit buffer) for response
1-99(mem 1-99),0x7f(edit buffer) for Rx
0x31 eq lib title 0-79(library 1-80) for response
40-79(library 41-80) for Rx
0x32 dynamics lib title 0-79(library 1-80) for response
40-79(library 41-80) for Rx
0x33 eff lib title 0-98(library 1-99) for response
42-98(library 43-99) for Rx
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0011nnnn 3n parameter request n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000010 02 function call
DATA 0ddddddd dd0 function
0ddddddd dd1 number
EOX 11110111 F7 End Of Exclusive
function number
---------------------------------------------------------------------------
0x30 scene title 0-99(mem 0-99),0x7f(edit buffer)
0x31 eq lib title 0-79(library 1-80)
0x32 dynamics lib title 0-79(library 1-80)
0x33 eff lib title 0-98(library 1-99)
290

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yamaha-01V

Zoeken resetten

  • kan ik meerdere inputs op 1 compressor toewijzen.
    Ik zou nl een 6tal microfoons door de compressor willen halen.
    Er zijn echter maar 3 compressors ter beschikking.
    Als ik comp1 toewijs aan ch 1 werkt dit op dit kanaal.
    Als ik echter ch 2 oproep en ik wijs daar ook comp 1 aan toe verdwijnt de comp op ch1 Gesteld op 10-9-2021 om 19:28

    Reageer op deze vraag Misbruik melden
  • heb al meer dan 12 jaar plezier van mijn ov1 yamaha mengtafel met automatische faders , sinds een paar maanden valt hij af en toe uit , moet er een interne batterij worden vervangen of is het slijtage? Gesteld op 9-9-2019 om 10:30

    Reageer op deze vraag Misbruik melden
    • Wat valt er uit? Het hele apparaat, het geheugen, het display, of audio aan de uitgang? Als het instellingen zijn van het geheugen zal het de interne batterij zijn. Geantwoord op 9-9-2019 om 20:19

      Waardeer dit antwoord Misbruik melden
    • Dank u wel voor het antwoord , nu weer terug naar mijn probleem:het hele apparaat valt uit , namelijk er komt geen audio meer door en het display vertoond hele rare afbeeldingen , dus wat te doen ? Geantwoord op 9-9-2019 om 21:11

      Waardeer dit antwoord (2) Misbruik melden
    • Resetten naar fabrieksinstellingen zou je eens kunnen proberen (zie initialiseren blz. 204 NL-handleiding). Let op: Alle opgeslagen instellingen raak je dan wel kwijt! -Memory knop ingedrukt houden, en dan aanzetten-. Geantwoord op 9-9-2019 om 21:23

      Waardeer dit antwoord (2) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha 01V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha 01V in de taal/talen: Duits als bijlage per email.

De handleiding is 5,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha 01V

Yamaha 01V Gebruiksaanwijzing - Nederlands - 314 pagina's

Yamaha 01V Gebruiksaanwijzing - English - 303 pagina's

Yamaha 01V Gebruiksaanwijzing - Français - 299 pagina's

Yamaha 01V Gebruiksaanwijzing - Italiano - 313 pagina's

Yamaha 01V Gebruiksaanwijzing - Português - 94 pagina's

Yamaha 01V Gebruiksaanwijzing - Espanõl - 314 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info