478504
62
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
Page 60 FT-950 OPERATING MANUAL
PARAMETRIC MICROPHONE EQUALIZER
(
SSB/AM/FM MODE
)
The FT-950 includes a unique Three-Band Parametric Microphone Equalizer that provides precise, independent control
over the low, mid and treble ranges in your voice waveform. You may utilize one group of settings when the speech
processor is off and an alternate group of settings when the speech processor is on. The speech processor feature is de-
scribed in the next chapter.
QUICK POINT:
The Parametric Equalizer is a unique technique for adjusting the signal quality. The three audio ranges may be adjusted so
precisely, it is possible to craft an audio response that provides a natural and pleasant sound that you may not have ever
experienced before. Alternately, the Effective “talk power” can be significantly enhanced.
The aspects of configuration that you may adjust on the Parametric Equalizer are:
Center Frequency: The center frequency of each of the three bands may be adjusted.
Gain: The amount of enhancement (or suppression) within each band may be adjusted.
Q: The bandwidth over which the equalization is applied may be adjusted.
Setup of the Parametric Microphone Equalizer
1. Connect the microphone to the MIC jack.
2. Set the RF output power to minimum value via the
Menu item “111 TGEN TX PWR”, so you will not
cause interference to other users while making adjust-
ments.
ADVICE:
We recommend that you connect a dummy load to
one of the Antenna jacks, and monitor your signal
on a separate receiver, to prevent interference to
other users.
You will have the best chance of hearing the ef-
fects of adjustments if you wear headphones (con-
nected to the monitor receiver) while listening to
your transmitted signal.
3. To adjust the Parametric Microphone Equalizer while
the speech processor is disabled, press the
[
PROC
]
button until the “ ” icon appears in the display.
To adjust the Parametric Microphone Equalizer with
the speech processor engaged, press the
[
PROC
]
but-
ton until the “ ” and “ ” icons appear in
the display.
4. Press the
[
MONI
]
button, if you want to listen on the
FT-950s internal monitor.
5. Press the
[
MENU
]
button momentarily. The Menu list
will appear in the display.
6. Rotate the
[
SELECT
]
knob to find the “EQ” Menu
area, containing Menu items “091” through “099”;
these parameters apply to the adjustment of the Para-
metric Microphone Equalizer when the speech proces-
sor is disabled. Menu items “100” through “108” ap-
ply to the adjustment of the Parametric Microphone
Equalizer when the speech processor is engaged.
ADVICE:
If you do not find the Menu item number, press the
[
SELECT
]
knob momentarily to switch the Menu item
name to the Menu item number.
7. Rotate the
[
CLAR/VFO-B
]
knob to perform adjust-
ments to a particular Menu item.
8. Close the PTT switch, and speak into the microphone
while listening to the effect of the changes you are
making. Because the overall effect on the sound will
change with each adjustment, you should make sev-
eral passes through each adjustment area, to be sure
that you are achieving the optimum settings.
9. When you have completed all adjustments, press and
hold in the
[
MENU
]
button for one second to save the
new settings and exit to normal operation. If you only
press the
[
MENU
]
button momentarily to exit, none of
the changes you performed will be stored.
ADVICE:
To roll off excessive bass response in a wide-range studio
microphone, try putting a 10 dB null at 100 Hz with a
bandwidth of “1” or “2”, do about a 3 dB null centered on
800 Hz with a bandwidth of “3,” and then put an 8 dB
peak centered on 2100 Hz with a bandwidth of “1.” These
are starting recommendations; each microphone and users
voice will be different, often requiring different settings.
ENHANCING TRANSMIT SIGNAL QUALITY
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
[
PROC
]
Button
[
MONI
]
Button
62

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-950

Zoeken resetten

  • Ft950 wil niet zenden met jtdx in ft8 ontvangt wel goed settings staan volgens Manuel ingesel, e weet raad? 73 PD4 PG Gesteld op 22-7-2024 om 22:04

    Reageer op deze vraag Misbruik melden
  • Bij het opstarten knippert TX. Ontvangst doet het, maar zenden niet. Wie heeft een oplossing? Gesteld op 15-4-2024 om 14:09

    Reageer op deze vraag Misbruik melden
  • Hoe sluit ik een digibox (MMSTV) aan op een FT950? Gebruikte voorheen een FT575GX2 . Deze had 3 tulpstekkertjes. Audio in audio uit en PTT ontvangst werkt goed en de zender schakelt ook in. Audio signaal klinkt niet zoals het hoort. Gesteld op 28-7-2023 om 19:00

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-950 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info