478467
50
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
48 FT-8800R Operating Manual
Sixteen DTMF Autodialer memories are available on the FT-8800R. These DTMF
Autodialer memories can store up to 16 digits of a telephone number for repeater autopatch
or other uses.
To load DTMF Autodialer memories, use following procedure:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #15 (
DTMF WDTMF W
DTMF WDTMF W
DTMF W).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the DTMF Autodialer memory channel number (“
d-1d-1
d-1d-1
d-1” through “
d-16d-16
d-16d-16
d-16”)
into which you wish store a telephone number.
4. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the first digit of the telephone number you wish to store.
5. When you have selected the correct digit, press the “Main” band DIAL knob momen-
tarily. Now, rotate the “Main” band DIAL knob to select the second of the 16 available
numbers in this current DTMF Audodialer memory register.
6. Repeat this procedure for each digit in the telephone number. Press the “Main
band
[
SCN
]
key momentarily to delete any previously-stored data after the cursor. If you
make a mistake, press the microphone’s
[
DWN
]
key to move back to the first digit, then
re-enter the correct number.
7. When entry of all digits is complete, press the
[
SET
]
key momentarily to save the new
setting.
8. If you wish to store another DTMF string, rotate the “Main” band DIAL knob to select
another DTMF memory register, then repeat steps 4 through 7 above.
9. When all required DTMF memories are filled to your satisfaction, press and hold in the
Main” band DIAL knob for 1/2 second to exit to normal operation.
To transmit the memorized telephone number, use the following procedure:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #15 (
DTMF WDTMF W
DTMF WDTMF W
DTMF W).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the DTMF Autodialer memory channel to be transmitted.
4. Press and hold in the “Main” band DIAL knob for 1/2 second to exit to normal opera-
tion.
5. Press the PTT switch.
6. While still holding the PTT switch in, press the “Main” band
[
HM
]
key momentarily to
transmit the tone string.
Once you have pressed the
[
HM
]
key in the above step, you can release the PTT switch, as
the Autodialer will transmit the whole DTMF string automatically.
DTMF AUTODIALER OPERATION
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-8800R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-8800R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info