478467
48
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
46 FT-8800R Operating Manual
The ARTS feature uses DCS signaling to inform both parties when you and another ARTS-
equipped station are within communications range. This may be particularly useful during
Search-and Rescue situations, where is important to stay in contact with other members of
your group.
Both stations must set up their DCS codes to the same code number, then activate their
ARTS feature using the command appropriate for their radio. Alert ringers may be acti-
vated, if desired.
Whenever you push the PTT switch, or every 25 seconds after ARTS is activated, your
radio will transmit a signal which includes a (subaudible) DCS signal for about one second.
If the other radio is in range, the beeper will sound (if enabled) and the display will show
IN.RNGIN.RNG
IN.RNGIN.RNG
IN.RNG” as opposed to the out of range display “
OUT.RNGOUT.RNG
OUT.RNGOUT.RNG
OUT.RNG” in which ARTS operation
begins.
Whether you talk or not, the polling every 25 seconds will continue until you de-activate
ARTS. Every 10 minutes, moreover, you can have your radio transmit your callsign via
CW, so as to comply with identification requirements. When ARTS is de-activated, DCS
will also be deactivated (if you were not using it previously in non-ARTS operation).
If you move out of range for more than one minute (four pollings), your radio will sense
that no signal has been received, three beeps will sound, and the display will revert to
OUT.RNGOUT.RNG
OUT.RNGOUT.RNG
OUT.RNG.” If you move back into range, your radio will again beep, and the display will
change back to the “
IN.RNGIN.RNG
IN.RNGIN.RNG
IN.RNG” indication.
During ARTS operation, it is not possible to change the operating frequency or other set-
tings on the “Main” band; you must terminate ARTS in order to resume normal operation.
This is a safety feature designed to prevent accidental loss of contact due to channel change,
etc. Here is how to activate ARTS:
Basic ARTS Setup and Operation
1. Set your radio and the other radio(s) to the same DCS code number, per the discussion
on page 30.
2. Press the
[
SET
]
key momentarily to enter the Set mode.
3. Rotate the “Main” band DIAL knob to select Menu #3 (
ARTSARTS
ARTSARTS
ARTS).
4. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the desired ARTS beep option. The available options are:
IN RNGIN RNG
IN RNGIN RNG
IN RNG: The beeps are issued only when the radio first confirms that you are within
range, but does not re-confirm with beeps thereafter.
ALWAYSALWAYS
ALWAYSALWAYS
ALWAYS: Every time a polling transmission is received from the other station, the
alert beeps will be heard.
5. Press the “Main” band DIAL knob momentarily. You will observe the “
OUT.RNGOUT.RNG
OUT.RNGOUT.RNG
OUT.RNG” dis-
play on the LCD. ARTS operation has now commenced.
ARTS
TM
: AUTO RANGE TRANSPONDER SYSTEM
48

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-8800R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-8800R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info