478497
22
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Page 20 FT-2000D OPERATING MANUAL
FRONT PANEL CONTROLS & SWITCHES
MIC RF PWR Knobs
MIC Knob
The inner
[
MIC
]
knob adjusts the microphone input
level for (non-processed) SSB transmission.
ADVICE:
If you adjust the MIC Gain while speaking in a
somewhat-louder-than-normal voice level, watch
the ALC level and adjust the MIC Gain so that the
ALC reaches just to the right edge of the ALC scale.
Then, when you speak in a more normal voice level,
you’ll be certain not to be over-driving the mic am-
plifier stage.
The Sub band (VFO-B) frequency display will show
the relative microphone gain level for 3 seconds
whenever the outer
[
RF PWR
]
knob is turned.
You may disable this feature (displaying the rela-
tive microphone gain level) via Menu item “015
diSP LVL IND.” See page 117 for details.
RF PWR Knob
The outer
[
RF PWR
]
knob is the main RF Power out-
put control for the transceiver, active in all operating
modes. Clockwise rotation increases the power out-
put. Adjust this control for the desired power output
from the FT-2000D.
ADVICE:
The Sub band (VFO-B) frequency display will show
the RF Power output for 3 seconds whenever the outer
[
RF PWR
]
knob is turned.
You may disable this feature (displaying the RF Power
output) via Menu item “015 diSP LVL IND.” See page
117 for details.
VOX DELAY Knobs
VOX Knob
The inner
[
VOX
]
knob sets the gain of the VOX cir-
cuit, to set the level of microphone audio needed to
activate the transmitter during voice operation while
the
[
VOX
]
switch is engaged. The
[
VOX
]
switch must
be switched “ON” to engage the VOX circuit.
DELAY Knob
The outer
[
DELAY
]
knob sets the hang time of the
VOX circuit for voice operation and keying delay for
CW operation.
During voice operation, this knob sets the hang time,
between the moment you stop speaking, and the auto-
matic switch from transmit back to receive. Adjust this
for smooth VOX operation, so the receiver is only ac-
tivated when your transmission is ended and you wish
to receive.
For CW operation, this knob sets the keying delay,
between the moment you stop sending, and the auto-
matic switch from transmit back to receive during
“Semi-break-in” operation. Adjust this just long enough
to prevent the receiver from being restored during word
spaces at your preferred sending speed.
ADVICE:
The Sub band (VFO-B) frequency display will show
the hang time of the VOX circuit for 3 seconds when-
ever the outer
[
DELAY
]
knob is turned.
You may disable this feature (displaying the hang time
of the VOX circuit) via Menu item “015 diSP LVL
IND.” See page 117 for details.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-2000D

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-2000D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-2000D in de taal/talen: Engels als bijlage per email.

De handleiding is 7,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info