16
TR800 Treadmill
1. Press the User 1-2 key once for User 1 or twice for User 2 then press Enter. Note that
the dot matrix display portion will have a single row of segments at the bottom (Unless
there is a previously stored program).
If there is a program stored under the key that is pressed, it will be retrieved. If not, you
have the option of programming in your rst name. The Display will ash the letter ”A” . To
change it, press the + key, then “B” will be displayed; if the - key is pressed, the letter “Z”
will be displayed. After selecting the appropriate letter, press enter. The letter “A” will again
be displayed and blinking. Repeat the procedure until all letters of your rst name are pro-
grammed (7 characters maximum). When your name is displayed, press Stop and it will
be stored under either User 1 or User 2.
2. The Message Center will now be blinking an Age value. Adjust the age and press Enter
3. The Message Center will now be blinking a weight value. Enter your bodyweight and
press Enter.
4. Note the clock/Message Center is ashing. Use the Adjust + / - keys to adjust up from 30
minutes (if desired). Press the Enter key. This is a must to continue even if time is not
adjusted.
5. The rst column (segment) will now be blinking. Using the + / - keys, adjust the speed
level to your desired effort for the rst segment then press Enter. The second column will
now be blinking. Repeat the above process until all 16 segments have been programmed.
The rst column will be blinking again. This is for the incline programming. Repeat the
above process to program all 16 segments for incline.
6. Press the Start button to begin the workout and also save the program to memory or
press Enter to go back one step to reprogram.
You are now done programming data and may press Start to begin your workout or Enter to
go back one level to change data entered in the programming phase.
User Programs