684578
21
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
21
E N
With the optional mounting clamp PC1 the charger can be
easy placed en taken, without removing the screws each time.
Connection with the battery
Due to the automatic voltage compensation we strongly recommend to leave the
cable length as it is. However, if you want to shorten the cable, it is important
that the length doesn’t become less than 0,7 meter. The cable length can be
extended, but that will also have effect on the automatic voltage compensation.
Use the already wired terminal rings for a fixed connection
with the battery.
For a flexible use you can simply use the supplied
crocodile clamps. This by fixing the clamps to the
terminal rings using the screw connection.
Connect the red wire on the + connection of the battery and the black wire on
the – connection of the battery.
Important
The battery junction that isn’t linked with the frame should be connected
firstly. The other junction must be made with the frame.
When the charger is to be used in an aluminium or steel ship/vessel, it
must be insulated by suspension. That is, in order to avoid electrolysis, the
casing of the charger may not be in contact with the ship.
The connection between the charger and the battery must be made some
distance from the fuel installation.
Advice
It is advisable to mount a fuse between the + pole of the battery and the +
bolt of the charger. Always use a fuse that is heavier than the charge
current.
After installing the charger and setting the charger, the charger is ready for
use.
IN USE
When the charger will be connected to the mains and the set-up mode isn’t
used, the charger will flash two times after 5 seconds and, if the battery is
connected, the charge process will start. When the mains is already present
and the battery will be connected, the charge process will also start
automatically.
The charge process
The LBC 500S standards has a 4-stage process to charge en maintain the
battery the correct way. The charger will always start in the first stage, the bulk
phase (LED red). This first stage has a minimum time length of 30 minutes, so
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xenteq LBC 512-15S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xenteq LBC 512-15S in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info