684578
20
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
20
E N
Whether or not to run temperature compensation is determined in set-up mode.
If the T-sensor is present when in set-up mode, then temperature compensation
is automatically activated. If the charger does not detect the temperature
sensor during set-up mode, then the charging program will run normally.
Activating the sensor
Attach the temperature sensor to the designated connector at the front of the
charger. Next, set the charger to set-up mode (see chapter Setting the charger.
This can be done at the same time as choosing the charge setting). The orange
LED light for 'charge process' will illuminate, indicating that the charger has
detected the presence of the temperature sensor and will apply temperature
compensation to the charging voltage. The presence of the temperature sensor
is saved in the charger's memory.
If you don’t want to use the T-sense any longer, then you need to remove the
temperature sensor and run the charger set-up mode again. The charger will
not detect a sensor (orange LED remains switched off), which means that
charging will not be temperature compensated.
Temperature sensor protection
If the charger is set for the T-Sense1, but during use the charger fails to detect
the sensor, then the charger will stop charging and the red ‘power’ LED will
illuminate.
If the temperature sensor has not been activated, but while in use the charger
detects the temperature sensor, then the charging process will stop and the red
‘power’ LED will illuminate. In the event of any other errors, such as incorrect
measurements, etc., the charging process will stop and the red ‘power’ LED will
illuminate.
If the fault is settled, the charger must be reset (by means of the main power or
stand by function)
INSTALLATION
The atmosphere
The battery should be charged in an area with adequate ventilation because it
may emit explosive gases. Be sure that there is enough space around the
charger. This is important for the air circulation, for cooling of the charger and
release of gases emitted. The LBC 500S may not be used outdoors.
Important
Don’t not charge when there is a fuel leak or fuel is evaporating.
Mounting
The charger can be mounted in different ways (preferably vertically) with the
mounting plate on the bottem of the charger. Place the charger on a stabile
underground.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xenteq LBC 512-15S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xenteq LBC 512-15S in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info