809350
43
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
43
Environment / disposal
Sense ll – 6 720 812 775 (2014/10)
Fault affecting the heat source
Locking faults on the heat source can be rectified by
performing a reset.
Reset the heat source.
See the operating instructions of the heat source for additional
information about eliminating faults affecting the heat source.
If the fault cannot be rectified by a reset, contact your
Installer.
10 Environment / disposal
Environmental protection is a fundamental corporate strategy
of the Bosch Group.
The quality of our products, their efficiency and environmental
safety are all of equal importance to us and all environmental
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for
protecting the environment taking into account of economic
considerations.
Packaging
We participate in the recycling programmes of the countries in
which our products are sold to ensure optimum recycling.
All of our packaging materials are environmentally friendly and
can be recycled.
Old electrical and electronic appliances
Electrical or electronic devices that are no
longer serviceable must be collected
separately and sent for environmentally
compatible recycling (in accordance with the
European Waste Electrical and Electronic
Equipment Directive).
To dispose of old electrical or electronic
devices, you should use the return and collection systems put
in place in the country concerned.
Technical terms
Setback phase
A time slot during automatic mode, with Setback operating
mode (a lower background temperature).
Automatic mode
The heating system is heating in accordance with the time
program and an automatic changeover takes place between
operating modes.
Mode
The operating modes for heating are: Heating and Setback.
They are depicted by the symbols and .
For a constant heating circuit only the Auto and Off are
available ( Chapter 5.3.2, page 19).
Operating modes for DHW heating are:DHW, DHW reduced
and Off.
An adjustable temperature is assigned to each operating mode
(except for Off).
Instantaneous water heater (combi boiler)
With this type of DHW heating, DHW is available on demand.
Compared with DHW heating via a DHW cylinder, it can take
longer for the required temperature to be reached at the draw-
taps. This delay can be reduced by activating the keep hot
function ( Temperature maintenance).
Frost protection
Depending on the selected frost protection, the heating pump
will turn on when the outside and/or room temperature reaches
below a certain set threshold. Frost protection prevents the
heating system from freezing up.
Required room temperature (also desired or set
temperature/set room temp.)
The room temperature to be achieved by the heating system. It
can be set individually.
Default setting
Values permanently saved in the programming unit
(e.g. complete time programs) that are available at any time
and that can be reinstated according to demand.
Heating phase
A time slot during automatic mode, where Heating operating
mode is active.
Hybrid device and hybrid system
Heating system comprising heat appliances which complement
one another with integrated optimisation control. Available as
a single unit or separate units (e.g. condensing appliance with
Heat source faults are always displayed on the
heat source.
If there is a BUS connection between the
controller and the heat source, faults are also
displayed on the controller.
If in doubt, ask your Installer about the type of
connection.
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch Greenstar Sense ll bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch Greenstar Sense ll in de taal/talen: Engels als bijlage per email.

De handleiding is 4.46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info