809227
7
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
7
Using your boiler
Greenstar Heatslave II 2022+ – 6 721 843 979 (2022/01)
3.2.3 Controlling central heating
Set the programmer/timer to the correct time with the
required ON/OFF periods.
Turn the room thermostat to the temperature required.
Set the thermostatic radiator valves to achieve the
required temperature for each room.
Turning the central heating off during the summer
Turn your programmer/timer to the off position.
Please refer to the programmer/timer manufacturer's
instructions.
3.2.4 Setting the hot water temperature
The hot water temperature control knob sets the temperature
of the heat store. A high setting will give a higher hot water
temperature and greater quantities of hot water.
1. Turn the hot water temperature control knob to the desired
level between 1 and 8, this will be shown on the digital
display.
2. The tap symbol will be displayed to confirm that the hot
water setting is being changed.
3. The value is displayed during this process, press to
exit or after five seconds of inactivity the boiler display will
return to the default screen.
Fig. 3
3.2.5 Domestic hot water (DHW)
The GREENSTAR HEATSLAVE II is microprocessor controlled
and at low DHW flow rates (washing hands etc), the burner will
not fire up immediately when the tap is opened as the heat
store will meet the demand, but at high flow rates (filling a bath
for example) the burner will fire up to boost the heat store and
meet the demand.
If DHW is OFF on the programmer, the appliance will still supply
DHW using heat stored in the tank, but it will not reheat the
tank, therefore the amount of water available is limited but is
adequate for washing up, filling basins etc.
We recommend that DHW is timed off overnight and when the
home is unoccupied to save energy. The timer should be set for
at least half an hour before normal hot water demands are
expected to reheat the heat store.
When reheating the heat store the controls will reclaim heat
from the boiler for the tank, this means that the pump will run
(and the blue light will be on) for some time after the burner has
turned off whilst heat reclaiming takes place.
3.2.6 Eco mode
Domestic hot water eco mode
Eco mode is an energy saving feature which alters the cycling
function of the burner for heating the heat store tank. In normal
operation the burner will fire more frequently between
demands in order to maintain a stored temperature close to the
hot water set point you have entered. In Eco mode, the burner
fires less frequently between demands meaning that the heat
store temperature is maintained at a lower average level, but
the tank set point remains the same.
By selecting Eco mode you will be using less energy as the tank
is allowed to cool a little more before reheating to the set point.
Selecting Eco mode
1. Press and hold for at least four seconds to enter the
energy saving Eco mode, when Eco mode is active, “Eco”
will be displayed.
Fig. 4
Exit eco mode
To exit Eco mode, press and hold for at least four
seconds, “Eco” will disappear
ok
6 720 805 211-03.1TL
WARNING: Scalding hazard
Care should be taken when using slow running
taps and showers.
In some circumstances, the combination
of low water flow rate and high setting of
the hot water control thermostat can result
in very hot water.
eco
eco
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch Greenstar Heatslave II Internal bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch Greenstar Heatslave II Internal in de taal/talen: Engels als bijlage per email.

De handleiding is 2.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info