638065
101
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
96
97
14.2 Adjusting the Height of the Handlebars
The height of the handlebars determines how much your upper body will be
inclined forward. Lowering the handlebars gives you a streamlined position
and brings more weight to bear on the front wheel. However, it also entails
an extremely forward leaning posture which is tiring and less comfortable,
because it increases the strain on your wrists, arms, back, upper body and
neck.
There are three different systems that allow vertical adjustment of the han-
dlebars, i.e. conventional, adjustable and Aheadset
®
-stem. These systems
require special knowledge. In this regard, the descriptions hereafter may be
incomplete. If you have the slightest doubt, ask your bicycle dealer for help.
The stem is one of the load bearing parts of your bicycle.
Changes to it can impair your safety. If you are in doubt or if you
have any questions, please contact your bicycle dealer!
Stems come in varying lengths as well as shaft and binder tube
diameters (a). If you opt for a stem of inappropriate sizing, han-
dlebars and stem may break and result in an accident. When
replacing any parts be sure to only use parts that bear the ap-
propriate mark and, to be on the safe side, original spare parts.
Your bicycle dealer will be pleased to help you!
Make sure the handlebar-stem-combination is approved by the
handlebar and/or stem manufacturer.
Check whether the handlebar clamping surface of the stem is
free of sharp edges (b). Ask your bicycle dealer for professional
advice.
The bolted connections of stem and handlebars have to be
tightened to the prescribed tightening torques (c). If you disre-
gard the prescribed values, handlebars or stem may come loose
or break. Use a torque wrench and never exceed the maximum
tightening torque! You will find the prescribed values in chapter
“Recommended Tightening Torques”, directly on the compo-
nents and/or in the manuals of the component manufacturers.
14.2.1 Adjustable Stems
There are various solutions for adjusting the tilt of the front part of adjustable
stems (d):
Some designs use bolts on the sides of the joint, others have bolts coming
from above or below, and some versions are equipped with additional lock-
ing mechanisms or adjusting bolts.
Ask your bicycle dealer to explain you both function and adjust-
ment of your stem or let him do that work.
a
b
c
d
Release the side clamping bolt at the joint (a) by two to three turns at the
most, i.e. without unscrewing it all the way. If you still cannot move the stem,
it is being held in place by a ratchet or integrated locking mechanism. If the
stem is fitted with a locking mechanism, release the holding bolt located on
the top or bottom side (b) of the stem a little. In the case of a ratchet mecha-
nism you will find the bolt on the side.
Adjust the stem according to your needs.
Gently retighten the bolt of the locking mechanism, until it engages. Bolts lo-
cated on the side only have to be tightened gently. If there are no side bolts,
you have to tighten the bolt of the locking mechanism. If the stem of your
bike has a ratchet mechanism, make sure its surfaces engage snugly as you
tighten the side bolt. Retighten the bolt on the side of the joint, if necessary.
Any bolts located on the top or bottom side of the stem have to be released
as far as necessary to disengage the ratchet mechanism and to move
the front part. It is usually not necessary to remove the bolts completely.
Retighten the bolts after setting the stem to the desired height.
Changing the position of the stem alters the position of han-
dlebars, brake and shift levers. Readjust them as described in
chapter “Adjusting the Tilt of Handlebars, Bar Ends and Brake
Levers….“.
14.2.2 Conventional Stems
Handlebars with conventional stems allow limited vertical adjustment. This is
done by moving the stem up or down inside the fork steerer tube.
Release the expander bolt by two to three complete turns (c). The stem
should now turn freely inside the fork. If it does not, release the bolt by tap-
ping it gently with a rubber hammer.
With Allen bolts, you need to stick the Allen key into its head first, as it is
normally countersunk and therefore impossible to be hit directly. Then gently
tap the key with the rubber hammer (d).
Never try to unscrew the top race when you only want to adjust
the stem, as you will otherwise alter the bearing play.
a
b
c
d
101

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Winora Algemene bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Winora Algemene in de taal/talen: Engels als bijlage per email.

De handleiding is 4,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Winora Algemene

Winora Algemene Gebruiksaanwijzing - Deutsch - 144 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info