10
FIRST USE
Connect the appliance to the water system and power supply (refer to the Installation manual).
When connected to the power supply, the display lights up and all the symbols appear for a few seconds.
Immediately afterwards, two hyphens flash on the freezer display whereas the refrigerator display
indicates a temperature of 5°C (factory-set).
The temperature indicator flashes and the acoustic signal remains activated until the optimum
temperatures are reached. To switch off the acoustic signal press the Alarm Reset button.
The temperature alarm indicator is automatically deactivated when the refrigerator compartment
reach the required temperature. This requires a variable amount of time, depending on several factors
(times the door is open, amount of food stored, ambient temperature). Average time is between 2 to 3
hours.
Note: It is not possible to modify or interact with the temperature display functions until the required
temperature has been reached.
USING THE APPLIANCE
