50963
32
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
9.3 DATA STRING : SETPOINT REQUEST with:
see table: 5 7 6
on page: 43 45 44
digit: 1 2 3 4 5 6 7 8 9 10 11 12
data: X # S W W W W W W @ A CR
B
o D
H
In the continuous sending mode (call nr. 0) a requested setpoint string will be transmitted one time only.
Thereafter the previous sending mode will be continued.
Specifications per digit:
Digit 1 X = Identification / call number, settable with switch 61 … 64. See table 5 on page 43
Nr. 0 ( =@ ) is always sending continuously
Digit 2 # = Code # identifies this string as a transmission from a 348.
In a received string (commands and questions) this may be a ! or a ?
Digit 3 S = This string contains the : Setpoint weight value, without decimal point
and with an extra (x10) decade: 10
-1
Digit 4 t/m 9 W = Setpoint value : 10
4
, 10
3
, 10
2
, 10
1
, 1, 10
-1
, without decimal *)
Digit 10 = Executive code and status (on / off) of the setpoint output. See table 7 on page 45
Digit 11 = Setpoint number (ASCII) : A, B, D or H (= 1, 2, 3 of 4). See table 6 on page 44
Digit 12 = Carriage Return
*) The comparison of the setpoint values against the actual (net) weight value is internal 10 x more accurate as
the value of the scale division itself, so: 1 : 150,000.
Therefore setpoint values should be sent with 10 x higher accuracy, by adding one extra decade to the right
of the setpoint value. Accuracy will be than: (10
-1
) = 1/10
e
scale division.
The accuracy of dosing may be controlled very precise with this feature.
Example:
At a weighing scale with 0.1 kg divisions, a required setpoint value of 50.0 kg should sent in (x 10) as 005000.
That means 5000 x 0.01 kg = 50.00 kg, and selectable per 0.01 kg.
9.4 DATA STRING : SYSTEM INFO REQUEST with:
digit: 1 2 3 4 5 6 7 8 9 10 11 12
data: # H + . T T T . V V V CR
In the continuous sending mode (call nr. 0) a requested setpoint string will be transmitted one time only.
Thereafter the previous sending mode will be continued.
In this string no call (identification) number is sent.
Specifications per digit:
Digit 2 H = Code H identifies this string as a transmission of the internal temperature and
actual voltage of the loadcell excitation. Values are without decimal point.
Digit 3 +/- = + of - sign of the indicated temperature value
Digit 5, 6, 7 T = Temperature internal in °C per 0,1° ( f.e. 412 = 41,2° C)
Digit 9, 10, 11 V = Actual excitation voltage of the loadcells in VAC per 0,01V ( f.e. 562 = 5,62 VAC)
Manual 348-2 V 3.1 Page 32 01-06-2007
X ? see digit 11 CR
X ? H CR
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Weightec 348 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Weightec 348 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Weightec 348

Weightec 348 Gebruiksaanwijzing - Nederlands - 49 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info