571834
19
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
19
GB
Setting the time
• Press the big-ame button and the small-ame button simultaneously, and the display will show short
ashes to indicate that you are in the set mode.
• When in the set mode, press the big-ame button to set the hours, and press the small-ame button
to set the minutes.
• Wait or press the OFF button to return to manual control.
Switching from ºC/24-hour to ºF/12-hour indication
• Press the OFF button and the small ame button simultaneously (2 sec) to switch from ºF (and the 12-
hour indication) to the ºC (and the 24-hour indication), and vice versa.
Possible settings
• By pressing the SET button you can switch quickly between MAN day temperature lamp ventilator
night temperature timer MAN.
• MAN: this setting allows you to turn the ames manually higher or lower with the big-ame button or the
small-ame button .
• Day temperature (): this mode allows you to set the desired daytime temperature; the remote control set
will function as a thermostat.
• Night temperature (): this mode allows you to set the desired night temperature.
• TIMER: this mode allows you to preset 2 switch-on and 2 switch-o times per 24 hours. If the night setting is
on - - -, the stove will burn on the pilot ame.
Setting the temperature
• Select the day temperature or night temperature by briey pressing SET button .
• Now press SET button longer until the display starts ashing.
• Preset the temperature with buttons or (5 ºC is the minimum day temperature).
• Wait or press OFF button to switch back to the thermostat-controlled system.
• In order to save the batteries you are advised to reset the night-temperature until the display shows the ‘- - -‘
signal.
Setting the timer function
• Select the timer function by briey pressing SET button a few times.
• Now press the SET button longer until P1 () starts ashing.
• Set the hours with button and the minutes with button .
• Briey press SET button for the next timing.
• Once all 4 timings have been set, press OFF button to end the presetting.
Operation (remote control)
Igniting the re
• Open the gas turncock that is xed in the gas pipe leading to the stove.
• Press “O I switch on the gas control block in the I position.
• Turn control button on the gas control block to the ON position.
• Simultaneously press buttons and on the handset. A short acoustic
signal indicates the start, and is followed by short acoustic signals (0.2
sec/signal, 1Hz.) until the pilot ame and the chief burner are ignited.
After the main burner has lit, the ame height will automatically go to
the maximum position.
Possible error messages
• Long signals (0.8 sec. signal with 0.2 sec. interval) during lighting : batteries of the receiver are almost
empty. (After hearing this signal, you can switch on the appliance for about another 10 times.)
• 5 seconds continuous signal : error message. One of the cables may not be connected, or the O I switch
is not in the I position.
• 5 short signals (0.2 sec. signal with 0.2 sec. interval) : ignition of the pilot ame and the main burner has
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Wanders-Balsa-100

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Wanders Balsa 100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Wanders Balsa 100 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 9,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info