Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Note: The following key can be used to activate the child lock of the appliance. Activation of the child lock is
indicated by the symbol (lock) in the timer field. To cancel the child lock, keep the button pressed for 3 seconds or
disconnect the appliance from the power supply for a short time.
3.) Preparation and installation of the filters
The air purifier is equipped with all filters from the factory. First open the front filter compartment door. Now remove
all the filters. Remove the protective cover from the fine filters and then push the filters back into their drawers in
the correct order. When inserting the filters, make sure that they are inserted the right way round. For the combi-
filter (HEPA + activated charcoal filter) we recommend that the white HEPA side faces to the right so that the air
flows through the HEPA filter first and only then through the activated charcoal filter. Finally, close the front filter
compartment door again properly, otherwise the air purifier cannot be operated.
See the charts below:
Anion exchanger / ion operation
Ion operation can be activated (deactivated) by pressing the symbol .
There are three (3) different fan strengths, press the following button for this:
Level 1 > Weak fan strength
Level 2 > Average fan strength
Level 3 > High fan power
When the symbol lights up, automatic air sensor operation has been activated
Time switch (timer)
You can select thefollowing (remaining) running times of the air purifier by repeatedly
pressing the timer button:
1 h / 2 h / 4 h / 8 h / 12 h
After this time has elapsed, the air purifier switches off automatically. If the setting 00h has
been selected, the unit runs in endless mode.
