09 Maintenance and specifications
Replacing bulbs
09
}}
359
Extra high beam
1
1. Remove the headlight housing from the
vehicle (see page 356).
2. Remove the cover over the bulbs (see
page 357).
3. Remove the bulb by turning it counter-
clockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and
turn it clockwise to put it in place. It can
only be secured in one position.
6. Put the cover back into position and rein-
stall the headlight housing.
Turn signals
1. Remove the headlight housing from the
vehicle (see page 356).
2. Remove the cover by pulling it straight
out.
3. Pull the holder to access the bulb.
4. Press in the bulb and turn it to remove it
from the holder.
5. Press and turn the new bulb into place.
6. Reinsert the bulb holder into the headlight
housing.
7. Put the cover back into position and rein-
stall the headlight housing.
Taillight housing
Brake light (LED)
Parking lights/side marker light (LED)
Turn signal
Brake light (LED)
Backup light
Rear fog light
1
Models with optional Active Bending Lights only.
