738218
39
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
39
9. ADDITIONAL FUNCTIONS
a) HOLD function
The HOLD function keeps the currently indicated measured value in the displays to allow you to read or record it
easily.
If you test live wires, make sure that this function is deactivated before the measurement starts.
Otherwise, the measurement will be incorrect!
Also observe that the HOLD button has not been pushed at the beginning of the measurement
(display with the HOLD button pushed: “H”). If the HOLD function is activated before commence-
ment of the measurement, no measured value is displayed!
Push the button “HOLD” (3) to activate the hold function. The HOLD symbol “
“ appears in the display. Push the
button “HOLD” to deactivate the HOLD function. The HOLD symbol goes out.
b) Display lighting
With the DMM switched on, the display lighting button (3) can be used to switch the display lighting on and off. To
switch on and off, keep the button pushed for approx. 2 seconds. The display lighting remains switched on for max.
15 seconds and goes out automatically then, or when previously switched off via the button (3). When switching off
the DMM via the dial switch (position “OFF”), the display lighting goes out as well.
c) LED lamp
With the DMM switched on, the latching switch (9) can be used to switch the integrated LED lamp on and off. The
switch latches when pushed and switches the LED at the front of the DMM (11) on. With the switch pushed, this
function remains active, but is switched off as well when switching off the DMM via the dial switch. When switching
on the DMM again, the LED lamp lights up at once. The activated lighting remains active until the meter is switched
off manually or via the latching switch (9).
The automatic deactivation does not switch off the LED lamp as well!
d) Automatic power-off
An automatic deactivation function switches off the multimeter independently if it is not used for an extended period.
This protects the battery and extends its service life.
If the meter is not operated for approx. 15 minutes, it switches off automatically. One minute before the deactivation
time, 5 signal sounds are issued to indicate that the device will switch off soon.
The deactivation can be delayed by another 15 minutes by pushing the button “SELECT”.
The automatic deactivation is performed with a long signal sound.
The meter can be reactivated by pushing the button “SELECT” or by switching the dial switch off and on again via
the position “OFF”.
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Voltcraft VC165 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Voltcraft VC165 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info